Poynting A-MIMO-0003-V2-13 network antenna Omni-directional antenna SMA 5.8 dBi

ANT-MB-42G-S-B-1 Antennas

ANT-SLM-40G-S-RA-B-1 Antennas

Peplink Mobility 42G network antenna MIMO directional antenna SMA 8.2 dBi Antennas

4x Cellular | 1x GPSWith 4 cellular channels, the Mobility 40G is a powerhouse capable of delivering high bandwidth and solid reliability under heavy use. Equipped with high gain LNA, the GPS receiver has improved location tracking

Peplink 2dBi Indoor Cellular Antenna Antennas

1x 2dBi LTE Antenna for MAX HD2 Mini/ BR1 MK2

Peplink Mobility 42G network antenna MIMO directional antenna SMA 8.2 dBi Antennas

With 4 cellular channels, 2 Wi-Fi and a GPS, the Mobility 42G provides ultrawide bandwidth within a single antenna housing. The Mobility 42G is designed for heavy network usage and solid reliability.

Cisco 4G-AE010-R Indoor cellular signal booster Grey Antennas

The Cisco 4G-AE015-R antenna base is a remote antenna solution for the Cisco 4G wireless WAN EHWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

Cisco 4G/3G Omnidirectional Dipole Antenna network antenna Omni-directional antenna TNC 2 dBi Antennas

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees. - Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.

Cisco Multiband Swivel-Mount Dipole Omni-directional Antenna network antenna Antennas

The AIR-ANTM2050D-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM2050D-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.

2.4GHZ OUTDOOR WI-FI ANTENNA KIT Antennas

2.4GHZ OUTDOOR WI-FI ANTENNA KIT

Peplink 2dBi Indoor Cellular Antenna Antennas

Indoor Cellular Antenna (704-960MHz/1575MHz:1dBi; 1710-2170MHz: 3dBi; 2300-2690MHz: 2dBi) (SMA)Require 1 unit per 3G modemRequire 2 units per LTE modem