ANT-2-4G2-O

Cisco 4G-AE010-R Indoor cellular signal booster Grey Antennas

The Cisco 4G-AE015-R antenna base is a remote antenna solution for the Cisco 4G wireless WAN EHWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

Cisco ANT-4G-OMNI-OUT-N network antenna Omni-directional antenna N-type 3.5 dBi Antennas

The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands and is supported on the Cisco CGR 2010, 1240, and the 1120 routers. The Omnidirectional Outdoor Antenna is compatible with Cisco 2G, 3G, and 4G cellular devices that use a Type N connector and requires a mast-mounted outdoor antenna.

ANT-4G-SR-OUT-TNC Antennas

Mikrotik 868 Omni network antenna Omni-directional antenna SMA 6.5 dBi Antennas

After reviewing your suggestions, we went back to the drawing board and redesigned the Antenna kit for LoRa. The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.

Cisco 4G-LTE-ANTM-O-3 network antenna Omni-directional antenna SMA 2.5 dBi Antennas

Indoor or outdoor low-profile antenna with 4-foot dongle, black radome.4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome.

Cisco 4G/3G Omnidirectional Dipole Antenna network antenna Omni-directional antenna TNC 2 dBi Antennas

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees. - Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.

Cisco 4G-LTE-ANTM-O-3 network antenna Omni-directional antenna SMA 2.5 dBi Antennas

Indoor or outdoor low-profile antenna with 4-foot dongle, black radome.4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome.

Cisco ANT-3-4G2G1-O= network antenna Omni-directional antenna TNC 5.5 dBi Antennas

Cisco 4G-AE010-R cellular signal booster Indoor cellular signal booster Grey Antennas

The Cisco 4G-AE015-R antenna base is a remote antenna solution for the Cisco 4G wireless WAN EHWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

Cisco 4G-LTE-ANTM-D network antenna Omni-directional antenna TNC 2 dBi Antennas

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees. - Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.