Cisco ASR-920-FAN-M= rack accessory Cooling fan

Digitus Keyboard Drawer & Document Storage for 483 mm (19") Cabinets Accessories

- lockable and equipable with handleThe Keyboard Drawer & Document Storage suit to all 483 mm (19”) profile rails of your network- or server cabinets. Available in various height units, they offer the perfect solution to keep your documents organized.

Digitus Leveling feet for network and server enclosures Accessories

- Installation under the cabinetThe DIGITUS® leveling feet come in a set of 4 pieces including mounting material and are therefore immediately mountable and ready for use. They offer a high level of stability for your 482.6 mm (19") cabinets. Suitable for all floor-standing cabinets in the Unique and Dynamic Basic series as well as standard wall-mounted cabinets in the Unique series.

Digitus Server Rack Unique Series - 600x1000 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Special roof construction for fan unit, incl. perforated cover- Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)- Sliding cable entry with rubber sealing on the top and baseThe server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Digitus Wall Mounting Cabinet, SOHO, unmounted - 540x400 mm (WxD) Accessories

The DIGITUS® Wall Mounting Cabinets are made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Unmounted flat package delivery for cost- and space effciency- Optimized air ventilation and exhaustion- Lockable glass door ensures safetyThe 483 mm (19”) network cabinets for wall installation from the SOHO series are delivered unassembled using a flat pack to optimize costs. Available in four rack units and equipped with a full glass door as well as a cable entry with brushes in the roof and floor, this is the perfect product for subdividing or building up a small to medium-sized network. Two pairs of galvanized 483 mm (19”) profile rails labeled with easy-to-read rack units are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). The door hinges can be switched. Installation takes just a few steps and is extremely easy thanks to the step-by-step instructions included.

Zebra BTRY-MC2X-49MA-01 handheld mobile computer spare part Battery Accessories

BTRY-MC2X-49MA-01PowerPrecision Lithium Ion battery pack, 4900mAh, extended capacity provides over 23 hours of use at room temperature before requiring a recharge

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x600 mm (WxD) Accessories

- Optimized air ventilation and exhaustion- Lockable glass door ensures safety- 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanizedThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Digitus Server Rack Unique Series - 600x1000 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Special roof construction for fan unit, incl. perforated cover- Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)- Sliding cable entry with rubber sealing on the top and baseThe server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Cisco DS-C32S-FAN-E= network switch component Fan tray Accessories

Digitus Keyboard Drawer & Document Storage for 483 mm (19") Cabinets Accessories

- lockable and equipable with handleThe Keyboard Drawer & Document Storage suit to all 483 mm (19”) profile rails of your network- or server cabinets. Available in various height units, they offer the perfect solution to keep your documents organized.