Cisco CAB-AC16A-CH= power cable Black 4.3 m SEV 1011 IEC C19

QNAP SP-ESNAS-FAN-MODULE computer cooling system part/accessory Accessories

HPE P03052-091 memory module 32 GB 1 x 32 GB DDR4 Accessories

Grandstream Networks GDS37X0-INWALL mounting kit Grey Metal Accessories

The In-Wall Mounting Kit is available for use with the GDS3710 and GDS3705. This mounting kit allows the GDS series to be mounted flushed within a wall rather on the surface of the wall. It supports solid wall, stud and drywall (hollow wall) installation. When installing any GDS series device or the In-Wall Mounting kit, please follow local building and electrical code. The device is suggested to be installed with the bottom of the device 50-55 inches above the ground.

Cisco NXA-FAN-35CFM-PE= network switch component Accessories

Ubiquiti UniFi Direct Attach 2m InfiniBand/fibre optic cable Black Accessories

Copper Cable (DAC), 10 Gbit/s

FPR9K-NM-6X10SR-F Accessories

FPR4K-NM-8X1G-F= Accessories

FPR9K-NM-6X10SR-F= Accessories

Cisco Firepower 2110 ASA hardware firewall 1U 2 Gbit/s Accessories

The Cisco Firepower® NGFW (next-generation firewall) is the industry’s first fully integrated, threat-focused next-gen firewall with unified management. It uniquely provides advanced threat protection before, during, and after attacks.

Digitus Network cabinet Unique series - 800x800 mm (WxD) Accessories

The DIGITUS® Unique series has been manufactured, designed and developed for the high demands of IT infrastructure.- Roof is prepared to accommodate a fan unit and an attached, removable cover- Locking system with swivel lever handle on front door (prepared to accept profile half cylinder; adapter included)- Slide-on cable inlet with foam rubber seal in the baseThe network cabinets in the Unique series have been developed for particularly convenient and flexible network cabling. Brush-equipped inlets in the top and base (from 26U and 800 mm cabinet width), a slide-on inlet in the base chassis with foam rubber seal and rear brush strips above and below the rear door (from 26U) enable versatile use in a wide range of application scenarios. Vertical cable ducts with cover, installed next to the profile rails (from 800 mm enclosure width), round off the design. An offset, removable cover with ventilation slots ensures improved air circulation. This sits over a special construction for easy mounting of a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the enclosure. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.