Cisco Power Cord/AC CE 3 m

Cisco CAB-ACS-16= power cable Black 2.5 m C23 coupler C19 coupler Accessories

By using system components manufactured by Cisco, you are assured a higher level of reliability and are less likely to experience compatibility problems. Cisco testing is among the most rigorous in the industry so you can be confident that you're receiving the highest quality and dependability.

Cisco CAB-US515-C15-US= power cable Black 3 m NEMA 5-15P C15 coupler Accessories

Cisco pays special attention to its network accessories, which are the foundation stone of the whole network system. Cisco has a wide range of network cables, connectors, adapters and other accessories that will fit the most extraordinary demands of the customers.

INTEL 8351N 2.4GHZ/225W 36C/54MB DDR4 2933MHZ Accessories

INTEL 8351N 2.4GHZ/225W 36C/54MB DDR4 2933MHZ

2911-AIRCVTR-NEBS= Accessories

TELTONIKA 2X8PIN CONNECTOR FOR TRB245 AND TRB255 Accessories

TELTONIKA 2X8PIN CONNECTOR FOR TRB245 AND TRB255

Teltonika PR2PD01B power cable Black 0.1 m DC 4-pin Accessories

Digitus Network cabinet Unique series - 800x800 mm (WxD) Accessories

The DIGITUS® Unique series has been manufactured, designed and developed to meet the high demands of IT infrastructure.- Roof is prepared to accommodate a fan unit and an attached, removable cover- Locking system with swivel lever handle on front door (prepared to accept profile half cylinder; adapter included)- Slide-on cable inlet with foam rubber seal in the baseThe network cabinets in the Unique series have been developed for particularly convenient and flexible network cabling. Brush-equipped inlets in the top and base (from 26U and 800 mm cabinet width), a slide-on inlet in the base chassis with foam rubber seal and rear brush strips above and below the rear door (from 26U) enable versatile use in a wide range of application scenarios. Vertical cable ducts with cover, installed next to the profile rails (from 800 mm enclosure width), round off the design. An offset, removable cover with ventilation slots ensures improved air circulation. This sits over a special construction for easy mounting of a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the enclosure. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

GRWIC-ISDN-1B-U= Accessories

MERAKI MT12 INDOOR WATER LEAK SENSOR Accessories

MERAKI MT12 INDOOR WATER LEAK SENSOR

GRWIC-BLANK= Accessories