Crestron CRESFIBER8G-SM-CONN-LC-12 InfiniBand/fibre optic cable

Name: Crestron CRESFIBER8G-SM-CONN-LC-12 InfiniBand/fibre optic cable
Brand: Crestron
SKU: CRESFIBER8G-SM-CONN-LC-12
Price: 501.12 EUR
Availability: OutOfStock

The CRESFIBER8G-SM-CONN-LC-12 is a pack of twelve factory pre-polished LC type fiber optic cable connectors designed for use with Crestron CresFiber 8G SM Single-Mode Fiber Optic Cable (CRESFIBER8G-SM). The connectors are field-installable using the CRESFIBER-TK termination kit.

ON ORDER

SKU: CRESFIBER8G-SM-CONN-LC-12

Manufacturer: Crestron

RRP Price €501.12

Description

Manufacturer

Crestron

WH1 (1–2 Days)

N/A

WH2 (1–3 Days)

N/A

WH3 (5–7 Days)

N/A

Weight

N/A

Country of Origin

N/A

Datasheet

No Data Sheet Found!

Accessories

No Accessories Found!

License

No License Found!

Related Products

Crestron DM-PSU-8-PLUS power supply unit Audio & Video

Power over DM (PoDM) is a feature of Crestron DigitalMedia 8G+ technology that enables many DM 8G+ transmitters and receivers to be powered over the same CATx cable that carries their video, audio, and data signals. Using PoDM affords a one-wire interface solution, and eliminates the need to install a bulky power pack at every transmitter and receiver location.The DM-PSU-8-PLUS supplies power for up to eight PoDM, PoDM+, HDBaseT PoE, or HDBaseT PoE+ powered devices. It is designed to install at the central switcher location, occupying just a single rack space and requiring just one AC power outlet. Each of its eight POWER ports connects to the POE IN port of a DMC-Series DM 8G+ type input or output card (refer to the Specifications for compatible card models). Connection between the DM-PSU-8-PLUS and switcher requires one CAT5e patch cable with RJ45 connectors per port (cables and connectors not included).The DM-PSU-8-PLUS supplies a full 30 Watts per port to handle Class 4 PoDM+ and HDBaseT PoE+ powered devices. It is also compatible with regular Class 0-3 PoDM and HDBaseT PoE powered devices. Front panel LEDs indicate when each port is supplying power to a compatible device.

€1,035.36

IN-WALL WIRELESS KEYPAD, 230VAC LINE POWERED, WHITE - 6504989 Audio & Video

IN-WALL WIRELESS KEYPAD, 230VAC LINE POWERED, WHITE - 6504989

€217.44

THREE GANG FACEPLATE PURE - ALU GREY - 6509059 Audio & Video

THREE GANG FACEPLATE PURE - ALU GREY - 6509059

€120.96

Crestron FT2A-CBLR-GR-4K-DP-HD cable gender changer Audio & Video

Crestron Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog AV and data signals. These cables retractors are passive.Should the cable within an FT2A-CBLR-GR series retractor ever become damaged, it can be replaced on site using a new FT2A-CBL-PT series cable.Note: See also the FT2A-CBLR-1T Series "One-Touch" Cable Retractors for applications with limited vertical space beneath the table.

€259.20

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 700 SIZE, ELECTRICAL, PASS-THROUGH LID, ALLOY - 6511977 Audio & Video

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 700 SIZE, ELECTRICAL, PASS-THROUGH LID, ALLOY - 6511977

€648.00

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 1200 SIZE, MECHANICAL, PASS-THROUGH LID, BLACK - 6511656 Audio & Video

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 1200 SIZE, MECHANICAL, PASS-THROUGH LID, BLACK - 6511656

€440.64

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 1200 SIZE, ELECTRICAL, PASS-THROUGH LID, ALLOY - 6511653 Audio & Video

FLIPTOP FT2 SERIES CABLE MANAGEMENT SYSTEM, 1200 SIZE, ELECTRICAL, PASS-THROUGH LID, ALLOY - 6511653

€613.44

DECORATOR STYLE FACEPLATE, 4-GANG, LATTE TEXTURED - 6506306 Audio & Video

DECORATOR STYLE FACEPLATE, 4-GANG, LATTE TEXTURED - 6506306

€34.56

DECORATOR STYLE FACEPLATE, 4-GANG, GRAY SMOOTH - 6506304 Audio & Video

DECORATOR STYLE FACEPLATE, 4-GANG, GRAY SMOOTH - 6506304

€34.56

DECORATOR STYLE FACEPLATE, 4-GANG, ALMOND SMOOTH - 6506281 Audio & Video

DECORATOR STYLE FACEPLATE, 4-GANG, ALMOND SMOOTH - 6506281

€34.56