DIN RAIL DIMMER, 1 FEED, 4 CHANNELS - 6502358

QNAP OceanKTV Audio Box Audio & Video

Crestron FT2A-CBLR-GR-4K-USBC-HD cable gender changer Audio & Video

Crestron Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog AV and data signals. These cables retractors are passive.Should the cable within an FT2A-CBLR-GR series retractor ever become damaged, it can be replaced on site using a new FT2A-CBL-PT series cable.Note: See also the FT2A-CBLR-1T Series "One-Touch" Cable Retractors for applications with limited vertical space beneath the table.

DM LITE 4K60 4:4:4 TRANSMITTER AND 2X1 AUTO-SWITCHER FOR HDMI AND USB-C DISPLAYPORT SIGNAL EXTENSION OVER CATX CABLE - 6511913 Audio & Video

DM LITE 4K60 4:4:4 TRANSMITTER AND 2X1 AUTO-SWITCHER FOR HDMI AND USB-C DISPLAYPORT SIGNAL EXTENSION OVER CATX CABLE - 6511913

HORIZON BACKLIT ENGRAVABLE ROCKER BUTTON, SIZE 5, ALMOND TEXTURED, INCLUDES CUSTOM ENGRAVING [LIMITED SUPPLY] - 6509732 Audio & Video

HORIZON BACKLIT ENGRAVABLE ROCKER BUTTON, SIZE 5, ALMOND TEXTURED, INCLUDES CUSTOM ENGRAVING

HORIZON 2 FACEPLATE, 1-GANG, ALMOND [AVAILABLE JUNE 30TH, 2023] - 6512461 Audio & Video

HORIZON 2 FACEPLATE, 1-GANG, ALMOND

HORIZON 2 BACKLIT PUSHBUTTON, STYLE 6, CUSTOM ENGRAVED, WHITE [AVAILABLE JUNE 30TH, 2023] - 6513138 Audio & Video

HORIZON 2 BACKLIT PUSHBUTTON, STYLE 6, CUSTOM ENGRAVED, WHITE

MEDIA PRESENTATION WALL PLATE – CRESTRON DIGITALMEDIA 8G+, BLACK - 6504296 Audio & Video

MEDIA PRESENTATION WALL PLATE – CRESTRON DIGITALMEDIA 8G+, BLACK - 6504296

Crestron MPC3/MPB3-TTK-SQR-SMK mounting kit Audio & Video

The MPC3/MPB3-TTK-SQR-SMK is a low-profile swivel mount accessory for the Crestron MPC3/MPB3-TTK-SQR table top kit, which is compatible with the MPC3-201 3-Series media presentation controller. It provides a means for permanently mounting the device to a tabletop surface while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limiting screws, with a maximum 330-degree rotation permitted.The swivel mount may be installed on any flat, level surface with a thickness of 1 inch (25 mm) minimum to 1-3/8 inch (35 mm) maximum. Wiring is routed through the center of the swivel mount, passing beneath the mounting surface for a completely hidden appearance.

SAROS EXPRESS 4" 2-WAY IN-CEILING SPEAKER, WHITE TEXTURED, SINGLE (MUST BE ORDERED IN MULTIPLES OF 2) - 6508131 Audio & Video

SAROS EXPRESS 4" 2-WAY IN-CEILING SPEAKER, WHITE TEXTURED, SINGLE (MUST BE ORDERED IN MULTIPLES OF 2) - 6508131