1000BASE-BX SFP, 1310NM, Industrial Temperature

Cisco C6800-SUP6T-XL= network switch module 10 Gigabit Ethernet, 40 Gigabit Ethernet Modules

The Cisco® Catalyst® 6800 Supervisor Engine 6T is the newest addition to the family of supervisor engines. The Supervisor Engine 6T is designed to deliver higher performance, better scalability, and enhanced hardware-enabled features. Supervisor Engine 6T integrates a 6-Terabit crossbar switch fabric that enables high performance on the Cisco Catalyst 6807-XL Chassis in active-standby mode. The forwarding engine on Supervisor Engine 6T is capable of delivering high-performance forwarding for Layer 2 and Layer 3 services. The rich feature set of Supervisor Engine 6T supports existing applications such as traditional IP forwarding, Layer 2 and Layer 3 Multiprotocol Label Switching (MPLS) VPNs, VPLS, MACSEC while supporting new features such as Instant Access, SGT, Hardware-Enabled BFD Offload and In-band Span. The Cisco Catalyst 6800 Supervisor Engine 6T and all the features and the technical advancements establish product leadership in next-generation enterprise campus deployments.

10G XFP TO XFP PASSIVE DIRECT ATTACH COPPER TWINAX CABLE, 2M (7FT) Modules

10G XFP TO XFP PASSIVE DIRECT ATTACH COPPER TWINAX CABLE, 2M (7FT)

Cisco SFP-10G-BXU-I network transceiver module Fiber optic 10000 Mbit/s SFP+ 1270 nm Modules

The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.

Cisco SFP-10/25G-LR-I network transceiver module SFP28 Modules

Cisco SFP-10G-LR-X= network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm Modules

The Cisco® 10GBASE SFP+ modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.

CUSTOMIZED 100GBASE-LR QSFP28 SINGLE LAMBDA 1270NM 10KM DOM DUPLEX LC SMF OPTICAL TRANSCEIVER MODULE Modules

CUSTOMIZED 100GBASE-LR QSFP28 SINGLE LAMBDA 1270NM 10KM DOM DUPLEX LC SMF OPTICAL TRANSCEIVER MODULE

10GBASE-LR SFP Module Modules

The Cisco 10GBASE-LR SFP Module delivers a wide variety of 10-Gigabit Ethernet connectivity options for data centre, enterprise and service provider applications over single-mode fibre. This hot-swappable input/output transceiver plugs into an Ethernet SFP+ port of a Cisco switch and offers optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link.

Cisco 100BASE-X SFP GLC-FE-100BX-U network media converter 1310 nm Modules

Features:-Hot-swappable when deployed, the switch or router does not have to reboot.-Supports the "pay-as-you-populate" model.-Interchangeable with other 100BASE-X SFPs on the same line card.-Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP.-Optically interoperable with respective 100BASE-X Ethernet interfaces on the same link.The Cisco 100BASE-FX SFP (part number GLC-FE-100FX) operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long.

CUSTOMIZED 10G CWDM SFP+ 1470NM-1610NM 20KM DOM DUPLEX LC SMF TRANSCEIVER MODULE FOR TRANSMISSION Modules

CUSTOMIZED 10G CWDM SFP+ 1470NM-1610NM 20KM DOM DUPLEX LC SMF TRANSCEIVER MODULE FOR TRANSMISSION

2G FIBRE CHANNEL SFP 850NM 300M MODULE, CISCO COMPATIBLE Modules

2G FIBRE CHANNEL SFP 850NM 300M MODULE, CISCO COMPATIBLE