4K MULTI-WINDOW VIDEO PROCESSOR WITH HDBASET & HDMI OUTPUTS - 6507977

4444 Audio & Video

Poly Sync 40 USB-A USB-C Speakerphone Audio & Video

Flexible. Simple. SmartBusiness moves fast. Joining virtual meetings should be fast, too. Poly Sync 40 USB/Bluetooth smart speakerphone lets users get straight to work. Hassle-free with quality audio – optimized for flexible and huddle workspaces.

Poly Sync 10 USB-A USB-C Speakerphone Audio & Video

Instant conference roomTurn your home office into a conference room. The all-in-one Poly Sync 10 USB speakerphone delivers high-quality audio that’s great for voice and music. Its two-microphone array reduces surrounding noise for better conference calls.

HORIZON PAINTABLE TRIM, 3-GANG, LIGHT [LIMITED SUPPLY] - 6510273 Audio & Video

HORIZON PAINTABLE TRIM, 3-GANG, LIGHT

ROUND GRILLES FOR SAROS 4” IN-CEILING SPEAKERS, WHITE, 10 PACK - 6506982 Audio & Video

ROUND GRILLES FOR SAROS 4” IN-CEILING SPEAKERS, WHITE, 10 PACK - 6506982

SQUARE GRILLES FOR 6 IN. OR 8 IN. REFERENCE AND ULTIMATE IN-CEILING SPEAKERS, ALUMINUM, 1 PAIR - 6511877 Audio & Video

SQUARE GRILLES FOR 6 IN. OR 8 IN. REFERENCE AND ULTIMATE IN-CEILING SPEAKERS, ALUMINUM, 1 PAIR - 6511877

Crestron TSW-770/1070-MUMK-W holder Passive holder Display White Audio & Video

The TSW-770/1070-MUMK permits a TSW‑770, TSW‑1070, TSS‑770, or TSS‑1070 series touch screen touch screen to be attached to the mullion of an interior glass wall, window, or partition. The TSW-770/1070-MUMK mounts a compatible touch screen to the left or right of any hollow, metallic vertical mullion. Two mounting brackets are provided that allow the TSW-770/1070-MUMK to be installed in one of two configurations (side mount or front mount). Wiring is run to the touch screen from inside the mullion to create a clean, finished appearance.The TSW-770/1070-MUMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW‑770‑LB and TSW‑1070‑LB light bars to provide a clear indication of the room availability status.

Crestron TSW-760-LB-W touch control panel Audio & Video

The TSW-760-LB Series Light Bar is an add-on accessory for a TSS-7 , TSW-760, or TSW-760-NC Series Touch Screen to provide 180° visual indication of the room availability status. With just a glance down the hallway, the Light Bar provides highly-visible indication of a room's availability as part of a complete Crestron enterprise room scheduling solution. It mounts to the rear of the touch screen and provides a ring of light around the perimeter of the touch screen. Its clean, stylish appearance and vivid color illumination complement any corporate office environment.Room Availability StatusFor room scheduling applications, the TSW-760-LB requires no special programming or configuration. The color of illumination is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion Enterprise Management Service or other supported calendaring application. It illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.Custom RGB Color MixingFor custom applications, the TSW-760-LB can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing is performed through programming of the Crestron control system controlling the touch screen (TSW-760[-NC] series only). The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.

Crestron TSW-760-LB-B touch control panel Audio & Video

The TSW-760-LB Series Light Bar is an add-on accessory for a TSS-7 , TSW-760, or TSW-760-NC Series Touch Screen to provide 180° visual indication of the room availability status. With just a glance down the hallway, the Light Bar provides highly-visible indication of a room's availability as part of a complete Crestron enterprise room scheduling solution. It mounts to the rear of the touch screen and provides a ring of light around the perimeter of the touch screen. Its clean, stylish appearance and vivid color illumination complement any corporate office environment.Room Availability StatusFor room scheduling applications, the TSW-760-LB requires no special programming or configuration. The color of illumination is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion Enterprise Management Service or other supported calendaring application. It illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.Custom RGB Color MixingFor custom applications, the TSW-760-LB can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing is performed through programming of the Crestron control system controlling the touch screen (TSW-760[-NC] series only). The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.

Crestron TSW-1070-MSMK-W-S holder Passive holder Display White Audio & Video

The TSW-1070-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW‑1070 or TSS‑1070 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-1070-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW‑1070‑LB light bar to provide a clear indication of the room availability status.The TSW-1070-MSMK attaches securely to a flat, smooth surface without screws using the included peel‑and‑stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.The TSW-1070-MSMK comes complete with a self‑adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.The TSW-1070-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive‑backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.