KT-TC58B1-DHLXP47-A6

Zebra SG-MPM-SC31-01 barcode reader accessory Case Accessories

This soft case allows for easy attaching/detaching for wear ability.

Digitus Lockable castors for free-standing network and server enclosures Accessories

- Set = 4 pieces- 2 pieces lockable- Rotating- Suitable for free-standing DIGITUS® network and server enclosures (Unique, Dynamic, Varioflex-N)The DIGITUS® lockable castors come in a set of 4 pieces including mounting material and are therefore ready for immediate installation and use. With a load capacity of 250 kg per unit, they offer high stability for your 19" cabinets.

Digitus Extendible Shelf for 483 mm (19") Cabinets Accessories

- Extractable, with handle bar- For fixing at the four 483 mm (19") mounting profile railsThe extendible Shelves are easy to install at the four 483 mm (19") profile rails of your 483 mm (19") cabinets. Due to the sturdy, perforated sheet steel with a high load capacity, they are the optimal surface for your network components. An attached handle can be installed to faciliate the extension of the shelf. Available in standard color grey (RAL 7035) and black (RAL 9005).

N77-C7718-AFLT= Accessories

Digitus Shelf for Fixed Installation in 483 mm (19") Cabinets Accessories

- Perfect for storage of components which are not 483 mm (19”) suitable- Slim design which takes space of 2 height units- Easy and quick to mount or dismountThe shelves for fixed mounting can be installed easy on the two front 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to their stable, perforated steel sheet with a high load capacity, they are the optimal surface for components which are not 483 mm (19”) suitable.

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x450 mm (WxD) Accessories

- 450 mm depth provides a space saving installation- Optimized air ventilation and exhaustion- Lockable safety-glass door with steel frameThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Digitus Blank Panel for 483 mm (19") Cabinets Accessories

- Easy installationThe Blank Panels suit to all 483 mm (19") profile rails of your network- or server cabinets. They are used to close non-used space within the 483 mm (19") area. This has positive effects in aesthetic looks as well as optimited air ventilation performance.

Digitus Blank Panel for 483 mm (19") Cabinets Accessories

- Easy installationThe Blank Panels suit to all 483 mm (19") profile rails of your network- or server cabinets. They are used to close non-used space within the 483 mm (19") area. This has positive effects in aesthetic looks as well as optimited air ventilation performance.

POWER SUPPLY BLANKING PANEL FOR C220 M4 SERVERS Accessories

POWER SUPPLY BLANKING PANEL FOR C220 M4 SERVERS