L-FPR2K-ASASC-10=

Digitus Wall-mounted housing 254 mm (10") - 312x300 mm (WxD) Accessories

DIGITUS® wall-mounted enclosures are manufactured, designed and developed to meet the high demands of IT infrastructure.- Compact housing for installations where space is limited- Ready for immediate use: Delivery is assembled- Flexible cable routing options thanks to protected openings in the roof and floor- Lockable safety glass door with 200° door opening angle- Depth-adjustable 254 mm (10") profile rails- Load capacity for the installation of components: 30 kgWhether in the home, office or in sub-distribution boards where space is limited: With the compact 254 mm (10") solutions, you can install your network wherever you want. Available in three height units (6U, 9U, 12U), the wall-mounted enclosures are equipped with a full glass door and a cable entry with brushes in the top and bottom. A pair of galvanized 254 mm (10") profile rails labelled with legible height units are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

AXIS T98A15-VE MEDIA CONVERTER CABINET A (230 V AC) Accessories

AXIS T98A15-VE MEDIA CONVERTER CABINET A (230 V AC)

AXIS T94A01F CEILING BRACKET Accessories

AXIS T94A01F CEILING BRACKET

Axis 21776 mounting kit Black, Metallic Accessories

Tool for tightening pole bracket steel straps.

AXIS ACC LENS M12 MEGAPIXEL 6PCS Accessories

AXIS ACC LENS M12 MEGAPIXEL 6PCS

Cisco GRWIC-1CE1T1-PRI= network switch module Accessories

The Cisco® Connected Grid portfolio of solutions is designed specifically for the harsh, rugged environments often found in the energy and utility industries. These solutions include the Cisco 2010 Connected Grid Router (CGR 2010) and the Cisco 2520 Connected Grid Switch (CGS 2520), which have been designed to support the communications infrastructure needs of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This infrastructure includes the utility- and customer-owned energy infrastructure, such as substation applications supporting electrical transmission and distribution, renewable generation, oil and gas, water, distributed generation, co-generation, and trackside operations. The infrastructure also includes the communications infrastructure for delivery applications such as transmission pipelines, distribution mains, and service lines for oil and gas and water. Designed for highly secure, reliable, and scalable infrastructure, the CGR 2010 and CGS 2520 are an ideal platform to support Smart Grid and other energy delivery infrastructure needs of customers. These ruggedized products have been extensively tested and are KEMA certified to meet the challenging substation compliance standards including IEEE 1613 and IEC 61850-3.The Cisco Channelized T1/E1 and ISDN PRI Rugged WAN interface card (GRWIC) modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). This rugged router platform is optimized for the harsh conditions common in connected energy applications worldwide. The Cisco Channelized T1/E1 and ISDN PRI Grid Router WAN Interface Cards (GRWICs) combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI) in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. The Cisco CGR 2010 supports a one- and a two-port version of the T1/E1 module (Figure 1) in a single-wide GRWIC. The different versions help enable customers to deploy different port densities, depending on wide area network needs in connected energy network locations.The modules can be used in T1 or E1 networks and are selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premise equipment (CPE). The modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes.

Axis 5800-541 rack accessory Accessories

It contains screws and cable clamps.Compatible with AXIS P33-VE.

AXIS PATCH CABLE A 200MM 6PCS Accessories

AXIS PATCH CABLE A 200MM 6PCS

8-Port Smart Antenna Connector to RP-TNC connectors, 2ft Accessories

Cisco SPA-1X10GE-L-V2 network card Internal Ethernet 10000 Mbit/s Accessories

The Cisco Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface processors (SIPs), taking advantage of an extensible design that facilitates service prioritization for voice, video, and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco Systems routing platforms. The Cisco I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. Cisco I-Flex enhances speed-to-service revenue and provides a rich set of quality-of-service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership. This data sheet contains the specifications for the Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter, Version 2 (Cisco 1-Port 10-GE SPA; Figure 1 shows a SIP with 10 Gigabit Small Form-Factor Pluggable [XFP] optics).The Cisco 1-Port 10-GE SPA is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.Within a central office or data center or in a metropolitan-area network (MAN), 10 Gigabit Ethernet interfaces are commonly used to interconnect routers or other devices. The Cisco 1-Port 10-GE SPA meets customers' needs for various applications. With this SPA, users can mix and match SPA ports with other types of interfaces in the same slot. The Cisco 1-Port 10-GE SPA is IEEE 802.3ae standards-based for compatibility and interoperability.