N9K-C9508-B3-G-P1

Cisco NIM-ES2-8-P= network switch module Gigabit Ethernet Switches

The 4- and 8-port Cisco® Gigabit Ethernet LAN Switch Network Interface Modules (NIMs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet switch ports within Cisco 4000 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized businesses and enterprise branch offices a combination of switching and routing integrated into a single device (Figure 1).Integration of these switches with Cisco IOS-XE Software allows network administrators to manage a single device using Cisco management tools or the router command-line interface (CLI) for LAN and WAN management needs. This approach reduces network complexity, lowers maintenance contract costs, and lessens staff training needs. It also simplifies software qualification efforts and delivers a consistent user experience at branch offices. Additionally, these low-density Gigabit Ethernet switching modules enable Cisco's industry-leading power initiatives, including per-port Power over Ethernet (PoE) and Power over Ethernet Plus (PoE+) power monitoring, which enhances the ability of the branch office to scale to higher performance requirements and still meet environmental initiatives for IT teams to operate a power-efficient network.The 4- and 8-port Gigabit Ethernet LAN Switch NIMs provide line-rate Layer 2 switching across onboard Gigabit Ethernet ports. The 4-port NIM has four 10/100/1000 switched Gigabit Ethernet ports. The 8-port NIM has eight 10/100/1000 switched Gigabit Ethernet ports, with a PoE/PoE+ version capable of powering all eight ports. The NIMs furthermore enable direct module-to-module communication through the use of the multigigabit fabric (MGF).The new features for the Gigabit Ethernet LAN Switch NIMs include four quality-of-service (QoS) queues per port, Shaped Deficit Weighted Round Robin (SDWRR), dynamic secure port, intra chassis cascading, up to 30W of PoE/PoE+ per port, and PoE per-port monitoring and policing.

TP-Link Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ Out Switches

PoE-Powered PoE Switch forSimplified Outdoor Network DeploymentOmada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ OutStandard PoE Passthrough to Extend Power and Data Transmission Distance up to 200 m Without Losing Gigabit SpeedsEliminate mains access location limits and transmit data and power through one cable, simplifying installation and cutting deployment costs. Doubles PoE source-to-device connection distance from 100 m (328 ft) to 200 m (656 ft), perfect for long-range surveillance cameras and access points.One Gigabit PoE++ In Port and Four Gigabit PoE+ Out PortsSupports up to 64 W / 44 W / 19 W/ 6 W PoE budget output when powered by 802.3bt Type 4 (90 W), 802.3bt Type 3 (60 W), 802.3at, and 802.3af PoE, respectively.** The PoE-PD switch automatically detects the required PoE power for your devices and protects your non-PoE equipment from being damaged.Specially Designed Weatherproof Enclosure for OutdoorsRated as IP55 during Ingress Protection testing, a resilient weatherproof enclosure protects the switch against harsh outdoor conditions.Easy Installation to Flexibly Fit Your NeedsEasy to mount to a wall or pole with the provided mounting kits. Its compact design allows you to place the switch flexibly, such as in an outdoor Junction Box.Value-Added Features Foster Touchpoint ExperiencesStatic RoutingHelps route internal traffic for more efficient use of network resources.Access Control List (ACL)ACL serves as a virtual admin, allowing all connected devices to obtain data in accordance with user-defined network rules and help you create the network regulations you need.QoS for Lag-Free ExperiencesDesignate the priority of traffic based on QoS, ensuring latency-sensitive applications, like voice and video, remain clear and lag-free.VLAN for Security and Flexible ManagementVLAN allows for logical grouping management of devices in different physical LANs, improving information security and reducing data congestion.Software Defined Networking (SDN) with Cloud AccessOmada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface.

TP-Link JetStream 28-Port Gigabit Smart PoE Switch with 24-Port PoE+ Switches

Realize More Possibilities with OmadaJetStream 28-Port Gigabit Smart Switch with 24-Port PoE+Software Defined Networking (SDN) with Cloud AccessOmada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more.

TP-Link TL-SM321B network transceiver module Fiber optic 1250 Mbit/s SFP Switches

TP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km(6.2 miles) with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.

Cisco SM-X-6X1G= network switch module Gigabit Ethernet Switches

Cisco® Gigabit Ethernet WAN Modules bring high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.The ports on these modules work as routed Layer 3 ports. Layer 2 switching between local ports on the module or between ports on the module and other ports within the router system is not supported. The port terminates Layer 2 trunks from externally connected switches, and Layer 2 trunk and VLAN information is not switched onto other ports in the system. The host router routes all traffic entering these modules.Cisco Gigabit Ethernet WAN Modules do not support Power over Ethernet (PoE).

Cisco SM-X-8FXS/12FXO= network equipment spare part Voice network module Switches

The FXO port is used to connect to PBX or key systems, or to provide off-premises connections to the PSTN. It supports battery reversal detection and caller ID. The FXO port is also used to connect to analog Centralized Automatic Message Accounting (CAMA) trunks to provide dedicated E-911 service (in North America only).The FXS port is used to connect analog phones, modems, fax machines, and speaker phones to an enterprise IP voice system, so you can use them as extensions to your Cisco or third-party IP call-control system. Having these devices tightly integrated with the IP-based phone system is advantageous for increased manageability, scalability, and cost-effectiveness. The Direct Inward Dialing (DID) port is used to provide off-premises DID connection from the central office. It serves only incoming calls from the PSTN. Caller ID is not supported in DID mode.

TP-Link 16-Port Gigabit Desktop Switch with 16-Port PoE+ Switches

Cisco Catalyst 9500 16-PORT 10GIG SWITCH. NETWORK ADVANTAGE Managed L2/L3 Gigabit Ethernet (10/100/1000) Grey Switches

The Cisco® Catalyst® 9500 Series Switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability. Based on an x86 CPU, the Catalyst 9500 Series is Cisco’s lead purpose-built fixed core and aggregation enterprise switching platform, built for security, IoT, and cloud. The switches come with a 4-core, 2.4-GHz CPU, 16-GB DDR4 memory, and 16-GB internal storage.The Catalyst 9500 Series is the industry’s first purpose-built 40 Gigabit Ethernet line of switches targeted for the enterprise campus. These switches deliver unmatched table scale (MAC/route/ACL) and buffering for enterprise applications. The Catalyst 9500 Series includes nonblocking 40G Quad Small Form-factor Pluggable (QSFP+) and 1G/10G Small Form-factor Pluggable Plus (SFP/SFP+) switches with granular port densities that fit diverse campus needs. The switches support advanced routing and infrastructure services (such as Multiprotocol Label Switching [MPLS] Layer 2 and Layer 3 VPNs, Multicast VPN [MVPN], and Network Address Translation [NAT]); software-defined access border capabilities (such as a host tracking database, cross-domain connectivity, and VPN Routing and Forwarding [VRF]-aware Locator/ID Separation Protocol [LISP]); and network system virtualization with Cisco StackWise® virtual technology that are critical for their placement in the campus core. The platform also supports all the foundational high-availability capabilities such as patching, Graceful Insertion and Removal (GIR), Cisco Nonstop Forwarding with Stateful Switchover (NSF/SSO), redundant platinum-rated power supplies, and fans.

Cisco IE-2000-16TC-G-N network switch Managed L2 Fast Ethernet (10/100) Black Switches

The Cisco® Industrial Ethernet 2000 (IE 2000) Series is a range of compact, ruggedized access switches that handle security, voice, and video traffic across industrial networks. They provide customers in industries such as automotive, oil and gas, mining, transportation, and energy with highly secure access and industry-leading convergence using Cisco Resilient Ethernet Protocol (REP).Product DetailsThe Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:- Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor- Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink- Dual-input DC power supply, alarm relays, DIN rail mount- Industrial Power over Ethernet (PoE) solution- Conformal coating available- Swappable SD flash card and mini-USB connector- Industrial environmental compliance and certifications- Industrial partner applications: Ethernet/IP and PROFINETPrimary Benefits and Features- Easy deployment: Zero-touch discovery using Dynamic Host Control Protocol (DHCP), express setup, and fast bootup time (60 seconds) to help in migrating to an Ethernet environment without resistance.- Security: 802.1x, port security, and DHCP allow dynamic port-based authentication; Secure Shell (SSHv2); SNMPv3 provides encrypted administrator traffic during Telnet and SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized control and restrict unauthorized users.- Resiliency: Flex links for fast recovery; Cisco REP protocol for fast convergence.- Manageability: Auto SmartPort, Web Device Manager, Telnet, HTTPS access, SNMP, CNA, and Cisco Prime Infrastructure 1.2.1.- Network Address Translation (NAT): Line-rate, hardware-enabled 1:1 static address translation designed to enable duplicate IP address usage in the Layer 2 machine node networks.- Industrial PoE: PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models.- Industrial automation protocols: Common Industrial Protocol (CIP) and PROFINETv2 allow integration with existing management platforms from Rockwell, Siemens, and others.Product SpecificationsSwitch Performance and Scalability- Line-rate, nonblocking uplink, downlink ports- Forwarding rate: 6.5 Mpps with 64-byte packets- Egress buffer: 2 MB- Unicast MAC addresses: 8000- Internet Group Management Protocol (IGMP) multicast groups: 255- Maximum virtual LANs (VLANs): 255- IPv4 MAC security ACEs: 384 (default ternary content-addressable memory [TCAM] template)- Bidirectional, 128 NAT translation entries