NCS-2RU-ACC-KIT=

FPR9K-NM-4X40G= Accessories

FPR1K-DT-WALL-MNT= Accessories

FPR1140-BUN Accessories

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x600 mm (WxD) Accessories

- Optimized air ventilation and exhaustion- Lockable glass door ensures safety- 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanizedThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x600 mm (WxD) Accessories

- Optimized air ventilation and exhaustion- Lockable glass door ensures safety- 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanizedThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Zebra 77197M printer kit Accessories

Zebra's replacement parts and printheads are quality components made to Zebra's exacting engineering standards. These cost-effective components ensure that your printer will continue to provide the quality, reliability, and performance you expect.QualityStamped from the same tools and dies as the originals, Zebra replacement parts and printheads are thoroughly inspected to ensure that they fit just as precisely as the originals. They are made from the same high-quality materials to provide superior performance and protection against wear.

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x600 mm (WxD) Accessories

483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized- 450 mm depth provides a space saving installation- Optimized air ventilation and exhaustion- Lockable safety-glass door with steel frameThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Digitus CAT 6 Surface Mount Box, 2-port Accessories

Future-oriented standards and high-end quality for your network.The DIGITUS® surface mount box is used for installation of consolidations points at desks, in intermediate ceillings as well as in underfloor systems. The installation will be placed via LSA-strips on the one side and via RJ45 jack on the other side.

Digitus Network cabinet Unique series - 800x800 mm (WxD) Accessories

The DIGITUS® network cabinets of the Unique series combine maximum stability with optimum flexibility in cable management, for the high demands of modern IT infrastructure with a wide variety of application scenarios.- High load capacity of the 483 mm (19") profile rails of up to 1200 kg- Swivel handle with profile half-cylinder lock incl. type 333 key on the front door- Vertical cable ducts with cable routing aids and cover installed in the front panel- Modular, openable base chassis with removable 19" blind panels- Flexible cable routing options thanks to generous cable inlets with brushes in the roof, base and rear- Roof is prepared to accommodate a fan unit and an attached, removable cover- Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)The network cabinets in the Unique series have been designed and produced for particularly convenient and flexible network cabling. Sophisticated optimizations offer market-compliant stability with maximum flexibility. A modular base chassis, which can be opened using screwed 483 mm (19") blind panels, offers sufficient space for cables of all kinds. In addition, there are side cable inlets with brushes at the top and bottom of the enclosure, as well as another at the rear of the base chassis. Rear brush strips above and below the rear door (from 26U) enable use in a wide range of application scenarios. Generous vertical cable ducts with cable routing aids and cover, installed in the front (from 800 mm enclosure width), perfectly round off the versatile features of the network enclosure. Two pairs of cranked and galvanized 483 mm (19") profile rails, labelled with height units that can be read in opposite directions, are installed inside. They are infinitely adjustable and are connected to additional depth struts in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Digitus 483 mm (19“) DIN Rail Holder, 4U Accessories

- For quick and screwless mounting of 35 mm DIN rail equipment- Incl. mounted DIN rail acc. to DIN EN 60715 (HxW= 35x390 mm), variable in depth- Rear side with c shaped cable tray for optimized cabling, variable in heightThe 483 mm (19“) DIN Rail Holder makes the installation of suitable equipment on the already mounted 390 mm width DIN rail possible. It is variable in depth and can be turned 90° up or down to install the components horizontally if necessary. The rear side is equipped with a height variable C shaped cable tray with fixing points for tape or cable ties. The complete frame can also be adjusted in height (4U brackets are fixed in the rack) to suit individual needs of space.