Cisco QSFP-100G-LR4-S= network transceiver module

10GBASE-ER SFP Module Modules

The Cisco® 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.

1000BASE-SX SFP transceiver module, MMF, 850nm, DOM Modules

1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength, extended operating temperature range and DOM support, dual LC/PC connector

Cisco GLC-ZX-SM-RGD network transceiver module 1000 Mbit/s SFP 1550 nm Modules

The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.1000BASE-ZX SFP for Long-Reach Single-Mode FibersThe 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 23 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

Cisco QSFP-40G-ER4= network transceiver module Fiber optic 40000 Mbit/s 1310 nm Modules

The Cisco 40GBASE-ER4 QSFP Module supports link lengths up to 40km over G.652 single-mode fiber with duplex LC connectors. The 40GE or OTU3 signal is carried over four wavelengths in the 1310nm range. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

Cisco QSFP-4X10G-LR-S network transceiver module Fiber optic 40000 Mbit/s 1310 nm Modules

The Cisco QSFP-4X10G-LR-S QSFP module supports link lengths of up to 10km on G.652 Single-Mode Fiber (SMF). It enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G mode for interoperability with 10GBASE-LR interfaces up to 10km.The 4x10G connectivity is achieved using an external 12-fiber parallel to 2-fiber duplex breakout cable, which connects the 4x10G LR module to four 10GBASE-LR optical interfaces. Cisco’s QSFP-4X10G-LR-S is optimized to guarantee interoperability in 4x10G mode over the full specification range of 10GBASE-LR and the SFP-10/25G-LR-S (in 10G mode). QSFP-4X10G-LR-S does not support FCoE.

800GBASE-XDR8 QSFP-DD 1310NM 2KM MODULE, GENERIC COMPATIBLE Modules

800GBASE-XDR8 QSFP-DD 1310NM 2KM MODULE, GENERIC COMPATIBLE

CUSTOMIZED 1000BASE-BX BIDI SFP 1550NM-TX/1310NM-RX 20KM DOM SIMPLEX LC/SC SMF TRANSCEIVER MODULE Modules

CUSTOMIZED 1000BASE-BX BIDI SFP 1550NM-TX/1310NM-RX 20KM DOM SIMPLEX LC/SC SMF TRANSCEIVER MODULE

IRMH-LTE-MNA-900 Modules

CUSTOMIZED 40G QSFP+ TO 1X10G SFP+ PASSIVE DIRECT ATTACH COPPER CABLE Modules

CUSTOMIZED 40G QSFP+ TO 1X10G SFP+ PASSIVE DIRECT ATTACH COPPER CABLE