SFP-OC3-LR2

Peplink EXM-MINI-1GLTE-G network switch component Fabric module Modules

Expansion Modules for Balance 20X / 380X / 580X

Shuttle PCM31, Triple COM port (RS232) expansion module for XH Slim-PC series Modules

Triple COM port expansion for Shuttle Slim-PC Barebone XH310 (R)The Shuttle Accessory PCM3 provides three additional COM ports to the front panel of the Shuttle Slim-PC Barebone XH310(R). However, using PCM3 means that no optical drive can be used.Scope of delivery:- Triple COM port adapter board (1x)- Appropriate front panel cover (1x)- Screws (2x)- Quick Installation GuideCompatibility:- Compatible with the Shuttle Slim-PC Barebones XH310 and XH310R (not with XH310V and XH310RV).Note:- Because the upper bay of the Shuttle Slim-PC Barebone XH310(R) is occupied by the Shuttle Accessory PCM31, an optical drive can no longer be used.

Cisco GLC-FE-T-I network transceiver module Copper 100 Mbit/s SFP Modules

MikroTik XS+DA0001 | SFP28 DAC Cable | 25Gbps, 1m Modules

1000BASE-BX SFP 1490NM-TX/1310NM-RX 20KM MODULE, CISCO COMPATIBLE Modules

1000BASE-BX SFP 1490NM-TX/1310NM-RX 20KM MODULE, CISCO COMPATIBLE

Cisco GLC-GE-100FX= network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm Modules

The Cisco® 100BASE-X Small Form-Factor Pluggable (SFP) device (Figure 1) is a hot-swappable input/output device that plugs into Fast Ethernet ports, dual-rate Fast/Gigabit Ethernet ports, or Gigabit Ethernet ports of a Cisco switch or router, linking the port with the fiber cabling network.Main features include the following:- Hot-swappable when deployed, the switch or router does not have to reboot- Supports the “pay-as-you-populate” model- Interchangeable with other 100BASE-X SFPs on the same line card- Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP- Optically interoperable with respective 100BASE-X Ethernet interfaces on the same linkCisco 100BASE-FX SFPThe Cisco 100BASE-FX SFP operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers (km) long.GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.GLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and routers.GLC-GE-100FX modules operate in Gigabit Ethernet ports of Cisco switches and routers.All these modules are interoperable with industrywide interfaces compliant to the IEEE 100BASE-FX standard.

APC Replacement Battery Cartridge 117 with 2 Year Warranty Modules

The genuine APC Replacement Battery Cartridge (RBC) is tested and certified for 100% compatibility to the the specific APC UPS. This lead-acid RBC has a lifetime of three to five years which offers reliable support and extends the useful life of your UPS. The APC RBC comes fully assembled and ready for use. To see the compatible UPS list, please click View Compatible UPS Modelsbutton in Get Support Section at APC.com

Cisco 1000BASE-BX10-D network media converter 1310 nm Modules

The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.The 1000BASE-BX-D, compatible with the IEEE 802.3ah 1000BASE-BX10-D standard, operate on a single strand of standard SMF.A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. The GLC-BX-D SFP also support digital optical monitoring (DOM) functions according to the industry-standard SFF-8724 multisource agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Cisco 100BASE-X SFP GLC-FE-100BX-D network media converter 1550 nm Modules

Features:-Hot-swappable when deployed, the switch or router does not have to reboot.-Supports the "pay-as-you-populate" model.-Interchangeable with other 100BASE-X SFPs on the same line card.-Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP.-Optically interoperable with respective 100BASE-X Ethernet interfaces on the same link.The Cisco 100BASE-FX SFP (part number GLC-FE-100FX) operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long.