CRESTRON FLEX SMALL ROOM CONFERENCE SYSTEM WITH JABRA PANACAST 50 VIDEO BAR AND WALL MOUNTED CONTROL INTERFACE FOR MICROSOFT TEAMS ROOMS - 6512602

Acer XL2330W 5000 ANSI lumens DLP WXGA (1200x800) White Audio & Video

Crestron BPC-8 gateway/controller Audio & Video

Simple, reliable control meets extreme affordability in the onCue Basic Presentation Controller from Crestron. Ideal for K-12 primary education classrooms and small meeting rooms, onCue provides a compact wall mount keypad controller (BPC-8) with eight assignable buttons for controlling a single projector, flat screen display, or source device. Crestron onCue can even be configured to control a complete room presentation system equipped with a display device, a motorized screen or lift, and a controllable source such as a DVD player.Always Ready - Easy to UseStop searching for lost remotes and constantly replacing batteries just to turn on the projector. Mounted on the wall or in a lectern, onCue is always at the ready, affording straight-forward operation through large, easy-to-read backlit buttons. A selection of pre-labeled buttons provides for control of power, source selection, and volume control, and all eight buttons are interchangeable to suit the application, delivering a customizable control solution that is immediately intuitive to every user. With onCue, every room in your facility can be set up for identical operation, so even if the display equipment varies from room to room, the user experience remains consistent.Super Simple InstallationThe onCue BPC-8 controller mounts conveniently in a single-gang electrical box or mud ring. A single 4-conductor cable links the BPC-8 to its companion interface module (BPC-8-IMC included), which may be installed anywhere up to 50 ft away. The tiny module typically installs at the display location, providing connectivity for up to three IR-controlled devices, one RS-232 controlled device, and an AC power pack.The BPC-8 ships with the interface module, power pack, one IR emitter, and a set of 13 interchangeable button caps. Just add the 4-conductor link cable and you've got everything you need to control a typical projector or flat panel display. Additional IR emitters, an RS-232 cable, and an alternate set of buttons for controlling a source device, are also available separately. Custom labeled buttons may also be ordered.Built-In LibraryConfiguring onCue to control a single display device is a simple two step process. Just find your display in the list provided, and enter its designated code using the BPC-8 keypad. That's it. The buttons come pre-configured out of the box, ready for controlling your display's power, volume, mute, and source select functions.Easy Learning and MoreYour onCue system can easily graduate to a higher level of control using the optional onCue software tool and BPC-HPLIR IR Learner & Programmer. With full access to the vast Crestron Database of IR devices, and the ability to learn IR commands from virtually any third-party IR remote, installers can easily assign any command to any button and enable control of multiple devices. The software tool also enables the entry of serial commands to support device control via 1-way RS-232.Macro MagicEven better, the software tool enables the creation of sophisticated macros, allowing onCue to send multiple commands to multiple devices with a single button press. Using macros, it can be possible to simultaneously select a source, turn on the projector, and lower the projection screen with one button. Or, use one button to "click" through the available sources one-by-one. A single macro can consist of up to 5 separate commands, with the ability to define a time delay or "wait for next button press" between each one.LED FeedbackEach button on the BPC-8 keypad controller includes a red LED to provide users with extra assurance behind every button press. Out of the box, these LEDs illuminate momentarily when the associated button is pressed. Using the software tool, the LED behavior can be customized to support toggle feedback (LED latches on and off with each successive button press), and interlock grouping. Interlock feedback is ideal for use with discrete source selection buttons, and discrete on and off buttons, to indicate the last selected source or power state.Extra SafeguardsAdditional capabilities include the options to enable passcode protection and auto-shutdown. Passcode protection prevents unauthorized use of the system by requiring the entry of a preset sequence of four button presses to enable operation. Auto-shutdown turns off the display device if no button is pressed within a preset amount of time, saving energy and preventing the premature failure of expensive projector lamps.Uploads at the Speed of LightAfter creating your custom configuration using the onCue software tool, simply use the handheld BPC-HPLIR IR Learner & Programmer to upload the configuration file to the BPC-8. The handheld BPC-HPLIR provides a convenient means for uploading a single configuration to any number of onCue controllers, requiring mere seconds to transfer the file via a simple optical cable. There's no need to remove the BPC-8 from the wall or even remove its faceplate, and one configuration can be used repeatedly for any number of identically equipped rooms, affording incredibly quick and easy setup of each room without any need to carry around a laptop.

Logitech R500 Laser Presentation Remote Audio & Video

Introducing the R500, a plug-and-play presentation remote that allows you to navigate slides and laser point from up to 20 meters (65 feet) away. Deliver your presentation with ease and confidence thanks to the unmistakable three-button design and R500’s comfortable, secure fit in hand. The R500 is optimized for most devices and popular presentation software – and you can customize buttons, check battery life, and set an on-screen timer in the Logitech Presentation App. May vary based on environmental and computing conditions.

SINGLE-CHANNEL MODULAR POWER AMPLIFIER, 50 W, 70 V [LIMITED SUPPLY] - 6511067 Audio & Video

SINGLE-CHANNEL MODULAR POWER AMPLIFIER, 50 W, 70 V

Crestron DIN-CENCN-2-POE bridge/repeater Network bridge 100 Mbit/s Black Audio & Video

Works with a Crestron® 3-Series Control System® to maximize Cresnet® network reliability and performance. Enables Cresnet data over high-speed Ethernet and features two isolated Cresnet subnets, built-in network diagnostics, and versatile power management.The Ethernet to Cresnet® Bridge (DIN-CENCN-2-POE) works with any Crestron® 3-Series Control System® to maximize the reliability and robustness of the Cresnet network. It offers a more sophisticated solution than a Cresnet block or hub, providing two isolated subnets and built-in diagnostics, plus versatile power distribution options and a convenient DIN rail form factor.The Cresnet® BusCresnet is the communications backbone for many Crestron keypads, lighting controls, shade motors, thermostats, occupancy sensors, and other devices that don’t require the higher speed of Ethernet. It provides a dependable and flexible wiring solution, allowing multiple devices to be wired together in parallel using both home-run and daisy-chain topologies. The Cresnet bus distributes bidirectional data communication and 24VDC power to each device over a single 4-conductor cable.Ethernet to Cresnet BridgeAdding one or more Ethernet to Cresnet bridges to a 3-Series Control System enables the distribution of Cresnet over high-speed Ethernet. The increased bandwidth afforded by Ethernet reduces latency for overall improved speed and performance. And, by leveraging existing LAN infrastructure in any facility, wiring distances can be extended easily while potentially reducing the overall wiring requirements. One or more bridges can be deployed on a single control system, and they can even be addressed by more than one control system, affording incredible flexibility in system design and functionality.Dual Cresnet SubnetsThe DIN-CENCN-2-POE provides two isolated subnets. Each subnet behaves as a Cresnet master with its own unique address space. A maximum of 20 Cresnet devices is supported per subnet, and each subnet furnishes six Cresnet connectors for easy termination of multiple lines.[1]Cresnet Power DistributionProper power distribution is key to a reliable Cresnet network. To facilitate proper powering, the DIN-CENCN-2-POE offers versatile, scalable power management using PoE or 24VDC. Ten Watts total Cresnet power is available to both subnets using PoE, which can be increased to 20 Watts using PoE+. Adding one or two external 24VDC Cresnet power supplies enables up to 75 Watts Cresnet power to either or each subnet depending on the configuration. For more details, refer to the “Power Requirements” section of the specifications.The DIN-CENCN-2-POE configures itself automatically based on the power sources connected. Built-in protection intelligently monitors the load and wiring conditions on each subnet, and shuts down power to either subnet in case of an overload, wiring fault, or power supply failure. If such an error occurs, only the subnet with the error is shut down, leaving the other subnet fully operable.Diagnostics ToolsMany common control system problems are caused by wiring faults, insufficient power, or too many devices. The latter is resolved by increasing bandwidth using Ethernet and limiting the number of devices that can be connected to each subnet. For the other issues, the DIN-CENCN-2-POE provides a full set of diagnostic tools to help identify and resolve them easily. From the unit’s front panel, an installer can press the “TEST” button and observe the LED indicators to see if there are any error codes. This allows wiring problems to be identified before ever powering up the control system. More complete details can be viewed and analyzed using a Web browser or Crestron Toolbox™ software. In a functioning control system, sporadically occurring errors caused by cut or faulty wires, disconnected devices, or failed power supplies can be reported to the control system in real-time to provide error notifications via a touch screen, mobile device, email, text message, SNMP, or Crestron Fusion® enterprise management software. Insertion of an SD memory card (not included) enables logging of Cresnet activity and errors over time, making it easier to diagnose intermittent issues that can’t be duplicated on demand.Power over EthernetUsing PoE+ technology, the DIN-CENCN-2-POE gets its operating power through the LAN wiring from a PoE or PoE+ power source (Crestron PWE-4803RU, CEN-SW-POE-5, or CEN-SWPOE-16 sold separately). Alternately, the unit can be powered by 24VDC Cresnet power. Refer to the “Power Requirements” section of the specifications for more details.DIN Rail MountingThe DIN-CENCN-2-POE is designed to snap onto a standard 35 mm DIN rail for installation in a wall mount enclosure or on any flat surface.[2] DIN rail mounting affords a very space-efficient, cost-effective, and modular solution for configuring complete control systems using a DIN-AP3 processor along with additional Crestron and third-party DIN rail mountable devices. 1 Crestron recommends a maximum aggregate cable length of 3000 feet (914 meters) per subnet.2 DIN rail not included. Crestron DIN-EN series enclosures sold separately.

4-SERIES DIN RAIL CONTROL SYSTEM - 6510417 Audio & Video

4-SERIES DIN RAIL CONTROL SYSTEM - 6510417

FOUR GANG FACEPLATE PURE - CHAMPAGEN STEEL - 6509106 Audio & Video

FOUR GANG FACEPLATE PURE - CHAMPAGEN STEEL - 6509106

THREE GANG FACEPLATE PURE - BAMBOO - 6509061 Audio & Video

THREE GANG FACEPLATE PURE - BAMBOO - 6509061

CISCO TABLE MICROPHONE WITH EUROBLOCK PLUG Audio & Video

CISCO TABLE MICROPHONE WITH EUROBLOCK PLUG