DISTI: INTEL 6330N 2.2GHZ/165W 28C/42MB DDR4 2667MHZ

Ubiquiti EXTD-COVER-CONCRETE-3 wireless access point accessory WLAN access point cover cap Accessories

Customized encasing for Access Point BeaconHD or U6 Extender.

Cisco RJ-45 to DB9F Console Cable, 6 Feet, Compatible with 600, 800, 1600 and 1700 Series Routers, 90-Day Limited Warranty (CAB-CONSOLE-RJ45=) Accessories

The Cisco RJ-45 to DB9F Console Cable, also known as a Management Cable, is designed to connect a computer terminal to the console port of a router for configuration. Originally sent with and compatible with Cisco 600, 800, 1600 and 1700 Series Routers, this 6-foot VGA to ethernet cable has a light blue colour and a flat design to help distinguish it from other network cables.

Motorola CBL-MC18-USB1-01 barcode reader accessory Accessories

12.6 inch cable, connects cradles to each other to run off one power supply (PWRS-14000-241R). Daisy chain: max = 6 terminals.

ROOM KIT EQ W/CODEC EQ NO-RADIO, QUAD CAM AND ROOM NAVIGATOR Accessories

ROOM KIT EQ W/CODEC EQ NO-RADIO, QUAD CAM AND ROOM NAVIGATOR

Zebra G41400M print head Direct thermal Accessories

Digitus Wall Mounting Cabinet Unique Series - double sectioned, pivoted Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Robust steel construction for sturdy wall mounting- Lockable safety-glass door with steel frame- Side panels are lockable and removableThe network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. Thanks to the integrated hinge in the back frame, the housing can be folded to the side if needed, for example in order to easily carry out assembly work in the back area of the cabinet. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. In addition, the back frame is equipped with brush management panels on the top and bottom. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. One pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. The back frame also has a 483 mm (19”) perforation. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall to open in either direction and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

Zebra BTRY-EC5X-EX1-01 handheld mobile computer accessory Battery Accessories