400G QSFP112 PASSIVE DAC TWINAX CABLE

100G QSFP28 TO 4X25G SFP28 AOC BREAKOUT CABLE Modules

100G QSFP28 TO 4X25G SFP28 AOC BREAKOUT CABLE

CUSTOMIZED 1000BASE-CWDM SFP 1270NM-1610NM 40KM DOM DUPLEX LC SMF TRANSCEIVER MODULE FOR TRANSMISSION Modules

CUSTOMIZED 1000BASE-CWDM SFP 1270NM-1610NM 40KM DOM DUPLEX LC SMF TRANSCEIVER MODULE FOR TRANSMISSION

CUSTOMIZED 100G QSFP28 TO 4X25G SFP28 PASSIVE DIRECT ATTACH COPPER BREAKOUT CABLE Modules

CUSTOMIZED 100G QSFP28 TO 4X25G SFP28 PASSIVE DIRECT ATTACH COPPER BREAKOUT CABLE

CUSTOMIZED 25G SFP28 ACTIVE OPTICAL CABLE Modules

CUSTOMIZED 25G SFP28 ACTIVE OPTICAL CABLE

CUSTOMIZED 40G QSFP+ ACTIVE OPTICAL CABLE Modules

CUSTOMIZED 40G QSFP+ ACTIVE OPTICAL CABLE

Cisco 1000BASE-LX/LH network transceiver module 1000 Mbit/s 1310 nm Modules

The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network (Figure 1). SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.1000BASE-LX/LH SFP for Both Multimode and Single-Mode FibersThe 100BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.

Cisco SFP-10/25G-LR-I network transceiver module SFP28 Modules

Cisco SFP-OC3-MM network transceiver module Fiber optic 1310 nm Modules

The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.

Cisco C6800-SUP6T-XL= network switch module 10 Gigabit Ethernet, 40 Gigabit Ethernet Modules

The Cisco® Catalyst® 6800 Supervisor Engine 6T is the newest addition to the family of supervisor engines. The Supervisor Engine 6T is designed to deliver higher performance, better scalability, and enhanced hardware-enabled features. Supervisor Engine 6T integrates a 6-Terabit crossbar switch fabric that enables high performance on the Cisco Catalyst 6807-XL Chassis in active-standby mode. The forwarding engine on Supervisor Engine 6T is capable of delivering high-performance forwarding for Layer 2 and Layer 3 services. The rich feature set of Supervisor Engine 6T supports existing applications such as traditional IP forwarding, Layer 2 and Layer 3 Multiprotocol Label Switching (MPLS) VPNs, VPLS, MACSEC while supporting new features such as Instant Access, SGT, Hardware-Enabled BFD Offload and In-band Span. The Cisco Catalyst 6800 Supervisor Engine 6T and all the features and the technical advancements establish product leadership in next-generation enterprise campus deployments.

HPE Aruba Networking 1G SFP LC LX 10km SMF Transceiver Modules

.