DISTI: INTEL 4310T 2.3GHZ/105W 10C/15MB DDR4 2667MHZ

Digitus Industrial Network Cabinet, Indoor, IP55 Accessories

- Safety class IP55 against dust & water ingress acc. to IEC EN60529- IK10 mechanical impact resistance acc. to IEC EN62262- 4 point locking system on front- & rear door- incl. already mounted plinthThe free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized, bolted panels. In addition, it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. A wraparound profile perforation supports a wide range of installation options in the cabinet. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). The adhesion capacity according to EN ISO 2409: Class 0 to 1 as well as the 500-hour test carried out for resistance against salt spray, demonstrates a permissible operating temperature from - 25 °C up to + 70 °C. The removable side walls, fastened with countersunk screws, as well as doors including swing handle with profile half-cylinder, improve the security of access.

Digitus Industrial network cabinet, indoor use, IP55 Accessories

- Protection class IP55 against water and dust ingress in accordance with IEC EN60529- IK10 impact resistance tested in accordance with IEC EN62262- 4-point locking of the front and rear door- incl. mounted baseThe free-standing industrial network enclosures are specially adapted to the requirements of harsh environments in accordance with protection class IP55. The base chassis can be opened modularly thanks to its galvanized, screw-fastened panels. It is also equipped with a slide-on cable inlet with a foam rubber seal and PG cable glands. A plinth (100 mm) mounted under the enclosure provides more storage space for excess cable lengths. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 2.0 mm thick. All-round profile perforation supports a wide range of installation options in the cabinet. The coloring takes the form of electrostatic powder coating in the standard color grey (RAL 7035). The adhesion according to EN ISO 2409: Class 0 to 1 and the 500-hour salt spray resistance test confirm a possible operating temperature of -25 °C to + 70 °C. The removable side panels, fastened with countersunk screws, and doors including swivel handle with profile half cylinder, improve the safety of accessibility.

Digitus 483 mm (19“) DIN Rail Holder, 4U Accessories

- For quick and screwless mounting of 35 mm DIN rail equipment- Incl. mounted DIN rail acc. to DIN EN 60715 (HxW= 35x390 mm), variable in depth- Rear side with c shaped cable tray for optimized cabling, variable in heightThe 483 mm (19“) DIN Rail Holder makes the installation of suitable equipment on the already mounted 390 mm width DIN rail possible. It is variable in depth and can be turned 90° up or down to install the components horizontally if necessary. The rear side is equipped with a height variable C shaped cable tray with fixing points for tape or cable ties. The complete frame can also be adjusted in height (4U brackets are fixed in the rack) to suit individual needs of space.

RJ45 CABLE DUAL-HEAD NETWORK EXTENSION ADAPTER COUPLER Accessories

RJ45 CABLE DUAL-HEAD NETWORK EXTENSION ADAPTER COUPLER

HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit Accessories

.

SPEEDFUSION CONNECT RELAY 1X 10/100/1000 ETHERNET MINI ENCLOSURE, 802.3AF POE INPUT Accessories

SPEEDFUSION CONNECT RELAY 1X 10/100/1000 ETHERNET MINI ENCLOSURE, 802.3AF POE INPUT

Digitus Network cabinet Unique series - 800x1000 mm (WxD) Accessories

The DIGITUS® network cabinets of the Unique series combine maximum stability with optimum flexibility in cable management, for the high demands of modern IT infrastructure with a wide variety of application scenarios.- High load capacity of the 483 mm (19") profile rails of up to 1200 kg- Swivel handle with profile half-cylinder lock incl. key type 333 on the front door- Vertical cable ducts with cable routing aids and cover installed in the front panel- Modular, openable base chassis with removable 19" blind panels- Flexible cable routing options thanks to generous cable inlets with brushes in the roof, base and rear- Roof is prepared to accommodate a fan unit and an attached, removable cover- Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)The network cabinets in the Unique series have been designed and produced for particularly convenient and flexible network cabling. Sophisticated optimizations offer market-compliant stability with maximum flexibility. A modular base chassis, which can be opened using screwed 483 mm (19") blind panels, offers sufficient space for cables of all kinds. In addition, there are side cable inlets with brushes at the top and bottom of the enclosure, as well as another at the rear of the base chassis. Rear brush strips above and below the rear door (from 26U) enable use in a wide range of application scenarios. Generous vertical cable ducts with cable routing aids and cover, installed in the front (from 800 mm enclosure width), perfectly round off the versatile features of the network enclosure. Two pairs of cranked and galvanized 483 mm (19") profile rails, labelled with height units that can be read in opposite directions, are installed inside. They are infinitely adjustable and are connected to additional depth struts in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Zebra MX202-SI00WW POS system Accessories

Zebra CBL-MPV-USB1-01 USB cable USB C USB A Black Accessories

CBL-MPV-USB1-05Spare USB Type A to Type C cable. Use this cable with the AC-USB Adapter or the Vehicle Lighter Adapter to charge your printer. Printer includes one cable.

Motorola RS232 Cable for cradle Host Accessories

RS232 CableThis cable for the MC90XX connects the single slot cradle to the host system, allowing for smooth data transmission.