ZUM WIRED DIN RAIL UNIVERSAL DIMMER MODULE [AVAILABLE MARCH 31ST, 2024] - 6513009

Crestron FT2A-CBLR-GR-USB cable gender changer Audio & Video

Crestron Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog AV and data signals. These cables retractors are passive.Should the cable within an FT2A-CBLR-GR series retractor ever become damaged, it can be replaced on site using a new FT2A-CBL-PT series cable.Note: See also the FT2A-CBLR-1T Series "One-Touch" Cable Retractors for applications with limited vertical space beneath the table.

Crestron FT2A-CBLR-GR-4K-MDP-DP cable gender changer Audio & Video

Crestron Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog AV and data signals. These cables retractors are passive.Should the cable within an FT2A-CBLR-GR series retractor ever become damaged, it can be replaced on site using a new FT2A-CBL-PT series cable.Note: See also the FT2A-CBLR-1T Series "One-Touch" Cable Retractors for applications with limited vertical space beneath the table.

Crestron FT2A-CBLR-1T-AUDIO cable gender changer Audio & Video

Crestron One-Touch Cable Retractors (FT2A-CBLR-1T Series) offer a refined cable management solution for use with Crestron FT2 ELEC Series FlipTops. Each cable pulls out smoothly to any length up to 5 feet (1.5 meter), and retracts gently back into the FlipTop with the touch of a button. The button on each module is backlit for visibility in a darkened room, and is labeled with an international symbol icon indicating the connection type.Start meetings with a clean conference table. Automate one-touch retractors by connecting all the retractors in a FlipTop to a control system and a switch, or to a DMPS via a single Cresnet cable. Custom programming can trigger all the retractors to "clean up the table" after five minutes of no video being detected.An electrically clutched, spring powered retraction mechanism allows for a compact design that is ideal for applications where vertical clearance is limited beneath the table.Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 11-5/8 inches (295 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 8-9/16 inches (218 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 9 inches (228 mm) horizontal clearance to the front or rear of the chassis.Several models of one-touch cable retractors are offered.The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog and data signals. These cables retractors are passive.NOTE: FT2A-CBLR-1T series retractors are only compatible with FT2 ELEC series FlipTops. They are not compatible with FT2 MECH series FlipTops. See also the FT2A-CBLR-GR Series "Gravity" Cable Retractors for a lower cost alternative.

Crestron FT2A-CBLR-1T-4K-DP cable gender changer Audio & Video

Crestron One-Touch Cable Retractors (FT2A-CBLR-1T Series) offer a refined cable management solution for use with Crestron FT2 ELEC Series FlipTops. Each cable pulls out smoothly to any length up to 5 feet (1.5 meter), and retracts gently back into the FlipTop with the touch of a button. The button on each module is backlit for visibility in a darkened room, and is labeled with an international symbol icon indicating the connection type.Start meetings with a clean conference table. Automate one-touch retractors by connecting all the retractors in a FlipTop to a control system and a switch, or to a DMPS via a single Cresnet cable. Custom programming can trigger all the retractors to "clean up the table" after five minutes of no video being detected.An electrically clutched, spring powered retraction mechanism allows for a compact design that is ideal for applications where vertical clearance is limited beneath the table.Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use.The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 11-5/8 inches (295 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 8-9/16 inches (218 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 9 inches (228 mm) horizontal clearance to the front or rear of the chassis.Several models of one-touch cable retractors are offered.The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.Additional models are available to support analog and data signals. These cables retractors are passive.NOTE: FT2A-CBLR-1T series retractors are only compatible with FT2 ELEC series FlipTops. They are not compatible with FT2 MECH series FlipTops. See also the FT2A-CBLR-GR Series "Gravity" Cable Retractors for a lower cost alternative.

Acer P1357Wi Standard throw projector 4500 ANSI lumens WXGA (1280x800) 3D White Audio & Video

CISCO ROOM KIT PRO PTZ 4K - CODEC PRO, PTZ 4 Audio & Video

CISCO ROOM KIT PRO PTZ 4K - CODEC PRO, PTZ 4

RIGHT SPEAKER CABLE FOR ROOM 70 Audio & Video

RIGHT SPEAKER CABLE FOR ROOM 70

CISCO WEBEX ROOM 55D, DUAL 55" SCREENS, NO RADIO Audio & Video

CISCO WEBEX ROOM 55D, DUAL 55" SCREENS, NO RADIO

Acer Predator GM712 4000 ANSI lumens DLP UHD 4K (3840x2160) Black Audio & Video

EXPAND YOUR HORIZONSTake your gaming to new horizons with the GM712’s HDR10-capable sharp projection in 4K UHD and go full speed in FHD at up to 240Hz on PC1 or choose from various modes that support variable refresh rate for both PC and next-gen consoles.SEE IT ALL SO CLEARLYSay farewell to your TV and transform any space into a game haven with just the right amount of home theater. We’re confident that with up to a 4K UHD 300-inch screen (though we recommend 75 inches at 2 m) – that you’ll want to see what else this projector is capable of.OH, THE COLORS!With the outstanding contrast ratio, HDR10 compatibility, and DynamicBlack™ Technology the projector adjusts to make brighter scenes glimmer with detail. In darker scenes, rich blacks are preserved and details, typically hidden in the shadows, are enhanced for greater overall luminance.FAST IS THE ONLY WAYIf you have the PC to feed the frames, then you can reach up to 240Hz in 1080p on PC1 via High Frame Rate1 mode or 120Hz in 1080p on the latest consoles2 with Variable Refresh Rate1 mode. Variable Refresh Rate keeps your gameplay seamless, tear-free and smooth. Visuals are improved by reducing or eliminating lag and/or judder through the use of syncing your display’s refresh to the output of your console or PC.CHOOSE YOUR MODEGame Mode fine-tunes images for how you want to see your game. Enhance contrast and dark levels to either immerse yourself in the environment or spot enemies attempting to avoid your sight. An additional football mode also enhances the brightness, saturation, sharpness, and gamma in the bright scenes for especially vivid images.WIRELESS SMART PROJECTORThe Predator GM712 works with multiple audio-visual platforms3 to give you the best audio-visual experience and lets you easily connect to various apps with ease. Enjoying your favorite shows is made even easier with the option to connect wirelessly and the addition of the 10W speaker and antimicrobial remote.DESIGNED TO DO MOREThe Predator GM712 is designed to be easy to install, be used 24/7, and includes a number of features and technologies to reduce its carbon footprint and extend the lifespan of the projector.

8-CHANNEL POWER AMPLIFIER, 150W/CH., 4/8 OHM OR 100V, INTERNATIONAL, 220-240V - 6507875 Audio & Video

8-CHANNEL POWER AMPLIFIER, 150W/CH., 4/8 OHM OR 100V, INTERNATIONAL, 220-240V - 6507875