AXIS STEEL STRAPS TX30 1450MM 1PAIR

IR1101-DINRAIL Accessories

Zebra SG-WT5X6-WMTDX-01 handheld mobile computer accessory Arm mount Accessories

Digitus Industrial Network Cabinet, Indoor, IP55 Accessories

- Safety class IP55 against dust & water ingress acc. to IEC EN60529- IK10 mechanical impact resistance acc. to IEC EN62262- 4 point locking system on front- & rear door- incl. already mounted plinthThe free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized, bolted panels. In addition, it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. A wraparound profile perforation supports a wide range of installation options in the cabinet. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). The adhesion capacity according to EN ISO 2409: Class 0 to 1 as well as the 500-hour test carried out for resistance against salt spray, demonstrates a permissible operating temperature from - 25 °C up to + 70 °C. The removable side walls, fastened with countersunk screws, as well as doors including swing handle with profile half-cylinder, improve the security of access.

Peplink 1" 14TPI male adapter Accessories

Compatible with:MAX HD1 DomeMAX HD2 DomeDome Pro DuoMobility 02Mobility 20GMobility 22GMobility 40GMaritime 20G (except ANT-MR-20G-N-W-6)Maritime 40G (The Deck Mount Set is included in the Antenna Package)

Peplink MAX BR1 Cellular network modem Accessories

Versatile Single Cellular with High Port CapacityThe MAX BR1 Pro comes with 4-port LAN switch and automatic failover, making it an ideal choice for deployments that demand outstanding reliability and flexibility.Connect Everything AffordablyThe BR1 PRO features 4x GE LAN ports to connect your wired clients, and 802.11 a/b/g/n Wi-Fi to connect your wireless clients. All this in rugged DIN mount compatible enclosure.Fits AnywhereAt 5.1 x 4.3 x 1.6 inches, the BR1 Pro can fit into tight spaces. It can also be mounted on DIN rails from different angles, so it fits anywhere that the rails can be installed.Mobile ReadyThe BR1 Pro can accept power via a terminal block and is equipped with GPS. It also supports Ignition Sense, enabling it to power up or down depending on the vehicle’s ignition status.Primary Line with LTE BackupIn case of a WAN failure, SpeedFusion Hot Failover technology powers the MAX BR1 Pro for instant failover between wired and cellular links as needed to keep your connection stable and fast.4-Port LAN SwitchThe four-port GE LAN switch allows the BR1 Pro to be dropped into any network transparently, without needs for extra cabling. Perfect for Branch Networking.Dual-Band Wi-FiThe MAX BR1 Pro comes with embedded dual radio 802.11n Wi-Fi AP. It operates both in 2.4Ghz and 5GHz bands concurrently, reaching 300Mbps. Redundant SIM SlotsDevice utilizes redundant SIM slots with automatic switching for reliable network. You can also set the MAX BR1 PRO to automatically switch SIM cards when you’re in danger of exceeding a data cap. It also allows you to travel across borders without changing SIM cards manually.

CBL-HS2100-QDC1-02 Accessories

Ubiquiti CamoSkin WLAN access point cover cap Accessories

DN-93502 Accessories

PEPLINK [STICKER B] Accessories

PEPLINK [STICKER B]