Poly Studio X52/V52 Wall Mount

Cisco Catalyst 9800-40 750W AC Power Supply Accessories

CISCO CATALYST 9800-40 750W AC POWER SUPPLY

Digitus Network cabinet Dynamic Basic series - 600x800 mm (WxD) Accessories

The DIGITUS® Dynamic Basic series has been manufactured, designed and developed for the high demands of IT infrastructure- Roof is prepared to accommodate a fan element (punched-out mounts)- Lockable swivel lever handle on the front door- Base with punched cable inlet, covered with screwed plateThe Dynamic series network cabinets have been developed for simple and particularly cost-optimized network expansion. Sophisticated positioning of the cable inlets ensures effortless installation depending on the application. In the floor chassis, this is located centrally at the rear, protected by a screw-fastened cover plate. Enclosures from 800 mm width are additionally extended by cable inlets with plastic covers on the left and right. These are also integrated in the roof (1 x for 600 mm enclosure width, 3 x for 800 mm enclosure width). The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side and rear panels as well as the lockable and removable front door improve accessibility. The door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Digitus Base for server enclosures in the Unique series - 800x1000 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Base for server enclosures in the Unique series - 600x1000 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Zebra KT-MC9X3X-STLSG-05 stylus pen Black Accessories

StarTech.com Cell Phone Repair Kit for Smartphones, Tablets and Laptops Accessories

This cell phone repair kit provides all the necessary tools for precision repairs on laptops, smartphones and tabletsThis 23-piece tool kit provides all of the essential screwdrivers, bits, tweezers and spudgers you'll need to repair virtually any smartphone, tablet or laptop. It’s the perfect addition to your electronics repair bench, for working on a wide range of mobile devices including iPhone, iPad, Samsung Galaxy®, HP Chromebook™, Lenovo® Think Pad®, Acer® Chromebook and MacBook.The kit includes:• Two spudger tools, as well as a triangle pry-tool and a suction cup that enable you to pry and remove the screen from a tablet or smartphone• A multi-bit screwdriver, with 16 bits that are suitable for opening the most popular smartphones, tablets and laptops, to remove or replace internal board screws and standoffs• A set of tweezers, for positioning small cables, connectors or chips within the housing of your mobile devices• A SIM card ejector pin, that enables you to remove SIM cards from smartphones and tablets• A convenient hard-shelled storage case, that provides a neat and tidy storage solution for all of the included toolsThe CTKRPR is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

CISCO ROOM NAVIGATOR-WALL MOUNT VERSION-FIRST LIGHT Accessories

CISCO ROOM NAVIGATOR-WALL MOUNT VERSION-FIRST LIGHT

Digitus Base for network cabinets from the Unique & Dynamic Basic series - 600x800 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS Professional. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Roof Cooling Unit for Unique Server Cabinets Accessories

The DIGITUS 483 mm (19") equipment is made for high demand IT-infrastructure solutions, produced on German standards.- For installation into top-floor moduleThe Roof Ventilation Units are suitable for all server cabinet of the Unique series. The installation in the roof module of the cabinet can be done quick and easy. A switch as well as an adjustable thermostat provide best options for customizations. The model is available in standard color grey (RAL 7035) and black (RAL 9005), equipped with either four or six fans.

Digitus Server Rack Unique Series - 600x1000 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Special roof construction for fan unit, incl. perforated cover- Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)- Sliding cable entry with rubber sealing on the top and baseThe server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.