Peplink ACW-112 interface cards/adapter RJ-45

Tripp Lite SRWO2UBRKT SmartRack 2U Low-Profile Vertical-Mount Vented Wall-Mount Mini Rack Enclosure, Black Accessories

2U Vented Rack Enclosure Ideal for Housing Network Equipment in Small SpacesThis SmartRack® cabinet is recommended for wiring closets, retail locations, classrooms, back offices and other confined spaceswhere you need server or network equipment to be organized and out of the way. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the vertical-mount SRWO2UBRKT has a maximum load capacity of 75 pounds (34 kilograms).Low-Profile Design Accommodates Switches, Panels and Other Standard Rack EquipmentThe 2U cabinet extends less than five inches (12.7 centimeters) from the wall while housing network components up to 19 inches (48.3 centimeters) deep, including switches and patch panels. It is vented on both sides to allow air to flow freely and keep equipment cool. The top and bottom are open for convenient cable routing and access.Easy Enclosure Deployment and Equipment InstallationThe SRWO2UBRKT comes assembled (except for the front panel) and ready to mount to a wall or beneath a desk. Rear keyhole mounting slots are spaced 16 inches (40.6 centimeters) apart to match standard wall studs. Hardware is included for equipment installation.

Tripp Lite SRRAILDPTH1U SmartRack 1U Mounting Rail Deep Adapter Kit for Server Racks, 4 in. (10.2 cm) Accessories

Increase or Decrease the Depth of Your Server Rack by 4 in.This SmartRack® rail-depth adapter kit lets you mount rack equipment so that it either extends four inches (10.2 centimeters) past the front vertical mounting rails or recesses four inches within the rails. This would benefit you, for instance, if you mounted extra-deep equipment that protruded out the front of the rack and prevented you from closing the door. Or it can allow you easier access to front cabling and help cut down on cable strain. Easy Installation Using the Included HardwareThe SRRAILDPTH1U comes with two steel mounting brackets made from heavy-duty steel with a black powder-coated finish to mesh seamlessly with your rack. Connect the 1U extension brackets to the front rails using the included hardware. Position the brackets outside the rails to increase rack depth or inside the rails to decrease rack depth. Then mount the equipment to the brackets. The SRRAILDPTH1U is compatible with EIA-standard 19-inch open frame racks and enclosures.

Cisco A9K-48P10G-AIP-TR= software license/upgrade 1 license(s) Accessories

CISCO MICROPHONE ARRAY FOR TABLE AND WEBEX ROOMS Accessories

CISCO MICROPHONE ARRAY FOR TABLE AND WEBEX ROOMS

Cisco NXN-K3P-8X-9GB= network card Internal Fiber 25000 Mbit/s Accessories

NXN-K3P-2X-4GB Accessories

CISCO CS-KITP60-K9 CISCO ROOM KIT PLUS P60 - CODEC PLUS, P60 CAM AND TOUCH 10 Accessories

CISCO CS-KITP60-K9 CISCO ROOM KIT PLUS P60 - CODEC PLUS, P60 CAM AND TOUCH 10

SAMSUNG 82" 8K MAIN MONITOR FOR ROOM PANORAMA Accessories

SAMSUNG 82" 8K MAIN MONITOR FOR ROOM PANORAMA

CISCO UCS B200 M6 BLADE W/O CPU MEM HDD MEZZ UPG Accessories

CISCO UCS B200 M6 BLADE W/O CPU MEM HDD MEZZ UPG

Canon VB-H45B Dome IP security camera Indoor 1920 x 1080 pixels Ceiling Accessories

2.1 MP, 1920 x 1080px, 1/3" CMOS, 60.4° FOV, 0.003 lx, 30 fps, 132x155mm, 1.14kg, Black