Peplink 1" 14TPI male adapter

CGR-BATT-4AH Accessories

Zebra Net Bridge v.1.2 Enterprise, 1-50p 1 - 50 printers License Accessories

Cisco VWIC3-1MFT-T1/E1= network equipment spare part Voice network module Accessories

These flexible interface cards support multiple integrated data, voice and video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solutionThe Cisco® Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. The 2 port T1/E1 MFT VWIC3 is shown below.The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards.The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers.The Cisco MFT VWIC3 cards are offered in single-, dual- and quadruple-port versions, which can be used and then redeployed as network requirements change, thereby addressing several applications:- E1/G.703 data: The Cisco 1- and 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 (including structured G.703 with G.704 framing), fractional E1, and unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.

KT-MC3401-0G1D43SS-A Accessories

Cisco Meraki MA-MNT-MR-5 wireless access point accessory WLAN access point mount Accessories

This kit provides replacement mounting accessories for Cisco Meraki MR26 access points, and can be used to mount to most 9/16”, 15/16” or 1 ½” T-rails. The kit contains a replacement mount plate, drop ceiling clips with set screws, two 6-32x4mm (flush T-rail) screws, two 6-32x7mm screws (recessed T-rail), two rubber spacers, two wall screws and anchors, security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).

Cisco Meraki MA-MNT-MR-4 wireless access point accessory WLAN access point mount Accessories

This kit provides replacement mounting accessories for Cisco Meraki MR18 access points, and can be used to mount to most 9/16”, 15/16” or 1 ½” T-rails. The kit contains a replacement mount plate, drop ceiling clips with set screws, two 6-32x4mm (flush T-rail) screws, two 6-32x7mm screws (recessed T-rail), two rubber spacers, two wall screws and anchors, security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).

AXIS F2105-RE STANDARD SENSOR Accessories

AXIS F2105-RE STANDARD SENSOR

Cisco PVDM3-64 network equipment spare part Voice network module Accessories

he Cisco High-Density Packet Voice Digital Signal Processor Module (PVDM3) enables Cisco 2900 and 3900 Series Integrated Services Routers Generation 2 to provide rich-media capabilities such as high-density voice video connectivity, conferencing, transcoding, transrating, and secure voice in Cisco Unified Communications Solutions.The next-generation high-density packet voice digital signal processor (DSP) modules are available in six densities: PVDM3-16, PVDM3-32, PVDM3-64, PVDM3-128, PVDM3-192, and PVDM3-256, with 16, 32, 64, 128, 192, and 256 channels, respectively.Features and BenefitsThe PVDM3s are supported on all Cisco 2900 and 3900 Series platforms. The PVDM3 provides higher density and more processing power than the PVDM2, making the addition of rich-media applications possible. Enhanced DSP architecture accommodates a new packet-processing engine optimized for rich-media voice and video applications, while concurrently supporting the time-division multiplexing IP (TDM-IP) voice framework used by the PVDM2.Investment Protection and Field-Upgradable CapabilityYou can now choose a DSP module ranging from 16 to 256 G.711 channels from the PVDM3 module portfolio. The PVDM3 modules all have the same form factor, and are used across Cisco 2900 and 3900 Series Integrated Services Routers. The field-upgradable capability can help you easily scale your voice deployments.In addition, DSPs on the PVDM3 provide more processing power and memory than the DSPs on the PVDM2. The high performance of PVDM3 supports future voice and video growth with a simple image upgrade to eliminate complete system upgrades. The PVDM3 modules can not only meet your needs today but also anticipate your needs in the future.Wide Range of Codec SupportThe PVDM3 modules support a wide range of codecs of different complexities. They support all codecs that are supported by the PVDM2 modules. Table 1 lists the codecs supported on the PVDM3 modules.

Zebra CBL-TC51-HDST35-01 audio cable 3.5mm Black Accessories

3.5MM Collared Female to 3.5MM Male Headset Adapter Cable.

Cisco Meraki MA-MNT-MR-8 wireless access point accessory WLAN access point mount Accessories

This kit provides replacement mounting accessories for Cisco Meraki MR42 access points, and can be used to mount to most 9/16”, 15/16” or 1 ½” T-rails. The kit contains a replacement mount plate, drop ceiling clips with set screws, two 6-32x4mm (flush T-rail) screws, two 6-32x7mm screws (recessed T-rail), two rubber spacers, two wall screws and anchors, security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).