Cisco Catalyst 8200 wired router Gigabit Ethernet Grey

P-LTEA-EA=

Cisco NIM-2T= network switch module

Cisco® 4400 Series Integrated Services Router Network Interface Modules (ISRNIMs) provide highly reliable synchronous serial WAN connections for remote sites. These interfaces use well-known point-to-point WAN protocols such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP) as well as Frame Relay, offering cost-effective virtualized WAN connections in both point-to-point and point-to-multipoint designs. You can mix and match NIMs to tailor cost-effective solutions for common networking solutions for low- and high-density WAN aggregation.

Cisco NIM-4T= network switch module

Cisco® 4400 Series Integrated Services Router Network Interface Modules (ISRNIMs) provide highly reliable synchronous serial WAN connections for remote sites. These interfaces use well-known point-to-point WAN protocols such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP) as well as Frame Relay, offering cost-effective virtualized WAN connections in both point-to-point and point-to-multipoint designs. You can mix and match NIMs to tailor cost-effective solutions for common networking solutions for low- and high-density WAN aggregation.

Cisco NIM-16A= network switch module

Cisco NIM-2BRI-S/T= network switch module

Cisco NIM-4MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-2BRI-NT/TE= network equipment spare part Voice network module

Cisco is the worldwide leader in networking that transforms how people connect, communicate, and collaborate. Their technology is changing the nature of work and the way we live. Founded in 1984, Cisco pioneered the development of Internet Protocol (IP)-based networking technologies. This tradition continues with the development of routing, switching, and other technologies such as application networking services, home networking, security, storage area networking, TelePresence systems, unified communications, video systems, and wireless.

Cisco NIM-VAB-A= network switch module

The Cisco® 4000 Integrated Services Router Family Network Interface Module (NIM) supports VDSL2 and ADSL2/2+ on a single WAN interface. The solution provides a secure, cost-effective solution for customers ranging from teleworkers and small businesses to large enterprise branch offices.

Cisco NIM-VAB-M= network card Internal RJ-11 100 Mbit/s

The Cisco 4000 Integrated Services Router Family Network Interface Module (NIM) supports VDSL2 and ADSL2/2+ on a single WAN interface. The solution provides a secure, cost-effective solution for customers ranging from teleworkers and small businesses to large enterprise branch offices.In combination with Cisco 4000 Integrated Services Routers (ISRs), this NIM provides high-speed digital data transmission between customer premises equipment (CPE) and the central-office DSL access multiplexer (DSLAM), usually located on the telephone company premises. Service providers and resellers can offer additional services such as business-class security; voice, video, and data; differentiated classes of service (CoS); and managed network access with Cisco IOS® Software over existing telephony infrastructure.With Cisco IOS XE Software Release 3.14 and later releases, the single-port multimode VDSL2 and ADSL2/2+ NIM is supported on the following Cisco 4000 routers: Cisco 4321, 4331, 4351, 4431, and 4451.ApplicationsBusiness-Class DSL with WAN BackupThe Cisco 4300 and 4400 Series ISRs offer multiple WAN slots. These routers can be configured with a Network Interface Module card for primary WAN access, providing redundancy for mission-critical applications. The WAN flexibility in these platforms enables the DSL cards with part numbers VDSL2 or ADSL2/2+ Network Interface Module for Annex A (NIM-VAB-A), VDSL2 or ADSL2/2+ Network Interface Module for Annex B/J (NIM-VA-B), and VDSL2 or ADSL2/2+ Network Interface Module for Annex M (NIM-VAB-M) to be used based on the VDSL2 or ADSL2/ADSL2+ supported technology.BankingIn this scenario, a bank branch office uses the Cisco 4331 with an VDSL2 or ADSL2/2+ Network Interface Module for Annex A (NIM-VAB-A) card and Ethernet connectivity through the front-panel Gigabit Ethernet ports to provide primary and backup WAN access. In addition, the Cisco SM-X 24-Port Layer 2/3 EtherSwitch Service Module is used for connectivity for local bank branch-office servers and teller and ATM machines. This scenario uses the versatility of the Cisco 4331 to enable banking databases to synchronize banking and ATM transactions without any interruption of WAN access, and it provides redundancy for other mission-critical applications.Business-Class SecurityThe Cisco 4300 and 4400 Series ISRs with the Network Interface modules can be optimized for Internet security with the Cisco IOS Firewall, supporting stateful-inspection-firewall and Cisco Cloud Web Security (CWS) Connector features. With an always-on DSL connection, Internet security and VPN capabilities are crucial to protecting corporate resources from malicious network attacks. You can enable these features on the Cisco 4000 Series ISRs by purchasing the optional Security Technology License or the AX feature set.These platforms can also be optimized for VPN to secure the Internet for communications with the same policies and levels of security and performance as a private network. VPNs provide security through encryption tunneling, and the Cisco routers support hardware-based Triple Data Encryption Standard (3DES), IP Security (IPsec), and Advanced Encryption Standard (AES).These advanced encryption features can be enabled on Cisco ISRs by purchasing the optional Security Technology License or the AX feature set.Application-Aware Networking with IP Quality of ServiceUsing Cisco quality-of-service (QoS) features, including Class-Based Weighted Fair Queuing (CBWFQ), Low‑Latency Queuing (LLQ), Weighted Random Early Detection (WRED), and others, Cisco 4000 Series routers with the Cisco Multimode VDSL2 and ADSL2/2+ NIM can help service providers and resellers offer services that can differentiate bandwidth based on the specific application or specific user. For example, network administrators can give traffic from a customer order entry priority over regular internal network traffic.PerformanceVDSL2 and ADSL2/2+ performance is a function of many variables, including the DSLAM line card, DSLAM software version, VDSL profile and band plan, line-noise conditions, loop length, and other environmental factors.Software SupportThe single-port Cisco Multimode VDSL2 and ADSL2/2+ NIM is supported on Cisco IOS XE Software Release 3.14 and later releases on Cisco 4321, 4331, 4351, 4431, and 4451 ISRs.The VDSL2 and ADSL2/2+ features are supported with the IP Base technology package license for the Cisco 4300 and 4400 Series ISRs.Platform SupportMultimode DSL (VDSL2 and ADSL2/2+) NIMs are supported only in the onboard NIM slots of the modular Cisco 4000 router platforms. Table 6 provides platform support details.

Cisco NIM-2FXS/4FXOP= network equipment spare part Voice network module

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.

Cisco NIM-24A= network switch module

Cisco NIM-VA-B= network switch module

The Cisco® 4000 Integrated Services Router Family Network Interface Module (NIM) supports VDSL2 and ADSL2/2+ on a single WAN interface. The solution provides a secure, cost-effective solution for customers ranging from teleworkers and small businesses to large enterprise branch offices.

Cisco NIM-1MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-2MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-4FXO= network equipment spare part Voice network module

Cisco is the worldwide leader in networking that transforms how people connect, communicate, and collaborate. Their technology is changing the nature of work and the way we live. Founded in 1984, Cisco pioneered the development of Internet Protocol (IP)-based networking technologies. This tradition continues with the development of routing, switching, and other technologies such as application networking services, home networking, security, storage area networking, TelePresence systems, unified communications, video systems, and wireless.

Cisco NIM-2CE1T1-PRI= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-8CE1T1-PRI network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-8MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-4BRI-S/T network switch module

The Cisco® 4000 Series Integrated Services Routers (ISRs) offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 2- and 4-Port ISDN BRI S/T Network Interface Modules (NIMs) offer investment protection by providing data connectivity to legacy ISDN networks for the 4000 Series ISRs. IntegrationThe 2- and 4-port ISDN BRI NIMs enable branches to use legacy ISDN Basic Rate Interface (BRI) networks for data connections. Because they support industry-standard ISDN dialup capabilities, these modules can be deployed as the main WAN connection over ISDN BRI, dial backup over ISDN BRI, or a combination of the two. Each physical interface supports data traffic over two 64-kbps B channels, which can be automatically bundled together using Multi-Link Point-to-Point Protocol (MLPPP).Investment protectionThe 2- and 4-port ISDN BRI NIMs provide a cost-effective ISDN Dial-on-Demand Routing (DDR) solution for use with legacy ISDN networks. These NIMs are supported on the Cisco 4000 Series ISRs and uphold Cisco's commitment to providing customers with maximum flexibility and investment protection.Because the same cards can be used on all Cisco 4000 Series ISRs, the number of stocking units can be reduced and the NIMs can be redeployed from one platform to another.Shared features with Cisco ISR G2 Series ISDN modulesThe Cisco 2- and 4-port ISDN BRI NIMs offer many of the same features as the ISR G2 Series ISDN BRI modules and can thus be smoothly deployed without any additional training.A new feature is full online insertion and removal (OIR or hot swap), which was introduced with the 4000 Series NIMs.

Cisco NIM-4BRI-NT/TE= network equipment spare part Voice network module

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI) (Figure 1). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services. Table 1 lists the available modules.

Cisco NIM-4E/M= network equipment spare part Voice network module

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.

Cisco NIM-4FXSP= network equipment spare part Voice network module

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.

Cisco NIM-2FXO= network equipment spare part Voice network module

Cisco is the worldwide leader in networking that transforms how people connect, communicate, and collaborate. Their technology is changing the nature of work and the way we live. Founded in 1984, Cisco pioneered the development of Internet Protocol (IP)-based networking technologies. This tradition continues with the development of routing, switching, and other technologies such as application networking services, home networking, security, storage area networking, TelePresence systems, unified communications, video systems, and wireless.

Cisco NIM-4SHDSL-EA= network equipment spare part Voice network module

The Cisco 4000 Series Integrated Services Routers Network Interface Module (NIM) supports single-port Cisco Multimode Four-Pair G.SHDSL-based WAN connectivity using both 802.3ah Ethernet in the first mile (EFM) and ATM modes. This NIM is used in modular routers that are deployed in Small and Medium-sized Businesses (SMBs) and enterprise branch offices.Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access, the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths, bonding of multiple pairs (4-wire, m-pair, inverse multiplexing over EFM bonding) is supported.In EFM mode, the multimode G.SHDSL NIM allows bonding, as defined by IEEE 802.3ah, and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service, the maximum data rate is 61.4 Mbps, with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard, which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.).In ATM mode, the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode, the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.)The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL), Single-line DSL (SDSL), T1, E1, and services beyond E1.The multimode four-pair G.SHDSL NIM, together with the ISR 4000 series router, provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).

P-LTEAP18-GL=

Cisco P-5GS6-GL= network equipment spare part Modem adapter

Cisco NIM-1T= network switch module

Cisco is the worldwide leader in networking that transforms how people connect, communicate, and collaborate. Their technology is changing the nature of work and the way we live. Founded in 1984, Cisco pioneered the development of Internet Protocol (IP)-based networking technologies. This tradition continues with the development of routing, switching, and other technologies such as application networking services, home networking, security, storage area networking, TelePresence systems, unified communications, video systems, and wireless.

Cisco NIM-1CE1T1-PRI= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-LTEA-EA= network switch module

LTE Advanced can provide either primary connectivity or backup communications, offering network resiliency for business continuity. With greater agility and speed to deployment than wired solutions, LTE Advanced can reduce network cost and complement wire-line public and private network access. Practical applications of LTE Advanced for organizations include parallel networks, primary connection, failover, in-vehicle connectivity, network convergence, and last-mile diversity. The LTE Advanced NIMs with the Cisco 4000 Series ISRs and ENCS 5400 Series lead the industry in bringing enterprise-grade functions such as quality of service (QoS), Multi-Virtual Route Forwarding (Multi-VRF), advanced VPN, and unified communications solutions over LTE.The Cisco LTE Advanced NIMs (Figure 1) provide an enterprise-class, multimode LTE Advanced wireless WAN (WWAN) solution. With Cisco ISRs, LTE Advanced is a powerful primary WAN access solution. Businesses can now run applications such as interactive video and telepresence on a primary LTE Advanced connection that is up to 150 times faster than 3G links, with far lower latency. These LTE Advanced modules support the latest Third-Generation Partnership Project (3GPP) Release 10 Category 6 LTE Advanced standards. Cisco multimode LTE Advanced WWAN NIMs provide persistent, reliable LTE Advanced connectivity, with fallback and transparent handoff to earlier technologies. The cards provide bandwidth to support high-definition (HD) and peer-to-peer (P2P) video calls, providing customers with an excellent mobile broadband experience. The Cisco LTE Advanced WWAN NIMs are tightly integrated with the services provided on the award-winning Cisco 4000 Series ISRs and ECS 5400 Series, which deliver highly secure data, voice, video, NFVs, and mobility services. The Cisco LTE Advanced WWAN NIMs are supported on the modular Cisco 4200, 4300, and 4400 Series ISRs and ENCS 5400 Series with Network Function Virtualization and services.Enterprises are looking for ways to reduce deployment time, enable comprehensive media services, increase revenue, and improve business continuity. The Cisco LTE Advanced WWAN NIMs, when coupled with a service provider’s wireless data plan, provide a rapidly deployable, high-bandwidth, reliable, and secure solution for branch offices and remote sites. With LTE Advanced fast data rates, these NIMs offer a primary WAN link solution capable of running comprehensive branch-office services, including voice and video services.Carrier aggregation makes it possible for carriers to transmit data to a device like a wireless router over multiple network bands at once, through a single “aggregated data pipe.” LTE Advanced with carrier aggregation utilizes multiple frequency bands at once, devices switch frequency bands in just a few milliseconds. Additionally, even if one band drops, the device stays connected via the second band in the aggregated data pipe.

Cisco NIM-2MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-4MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-8MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-1CE1T1-PRI= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-2CE1T1-PRI= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-2FXSP= network equipment spare part Voice network module

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.

Cisco NIM-8CE1T1-PRI network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-1MFT-T1/E1= network equipment spare part Voice network module

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.