Zebra P1050667-032 printer/scanner spare part/accessory

Digitus Wall Mounting Cabinet Unique Series - 600x450 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Robust steel construction for sturdy wall mounting- Lockable safety-glass door with steel frame- Side panels are lockable and removableThe network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

CS3560X-16-L-S Accessories

Digitus Network cabinet Unique series - 800x800 mm (WxD) Accessories

The DIGITUS® network cabinets of the Unique series combine maximum stability with optimum flexibility in cable management, for the high demands of modern IT infrastructure with a wide variety of application scenarios.- High load capacity of the 483 mm (19") profile rails of up to 1200 kg- Swivel handle with profile half-cylinder lock incl. type 333 key on the front door- Vertical cable ducts with cable routing aids and cover installed in the front panel- Modular, openable base chassis with removable 19" blind panels- Flexible cable routing options thanks to generous cable inlets with brushes in the roof, base and rear- Roof is prepared to accommodate a fan unit and an attached, removable cover- Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)The network cabinets in the Unique series have been designed and produced for particularly convenient and flexible network cabling. Sophisticated optimizations offer market-compliant stability with maximum flexibility. A modular base chassis, which can be opened using screwed 483 mm (19") blind panels, offers sufficient space for cables of all kinds. In addition, there are side cable inlets with brushes at the top and bottom of the enclosure, as well as another at the rear of the base chassis. Rear brush strips above and below the rear door (from 26U) enable use in a wide range of application scenarios. Generous vertical cable ducts with cable routing aids and cover, installed in the front (from 800 mm enclosure width), perfectly round off the versatile features of the network enclosure. Two pairs of cranked and galvanized 483 mm (19") profile rails, labelled with height units that can be read in opposite directions, are installed inside. They are infinitely adjustable and are connected to additional depth struts in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Digitus Wall Mounting Cabinet, SOHO, unmounted - 540x400 mm (WxD) Accessories

The DIGITUS® Wall Mounting Cabinets are made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Unmounted flat package delivery for cost- and space effciency- Optimized air ventilation and exhaustion- Lockable glass door ensures safetyThe 483 mm (19”) network cabinets for wall installation from the SOHO series are delivered unassembled using a flat pack to optimize costs. Available in four rack units and equipped with a full glass door as well as a cable entry with brushes in the roof and floor, this is the perfect product for subdividing or building up a small to medium-sized network. Two pairs of galvanized 483 mm (19”) profile rails labeled with easy-to-read rack units are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). The door hinges can be switched. Installation takes just a few steps and is extremely easy thanks to the step-by-step instructions included.

C9K-CMPCT-DESKMNT= Accessories

FPR3K-XNM-8X25G= Accessories

Mild steel galvanised laser cut V-Form bracket for LDPA-92 (horizontal & vertical mount) Accessories

Zebra TC26 handheld mobile computer 12.7 cm (5") 720 x 1280 pixels Touchscreen 236 g Black Accessories

TC21/TC26 TOUCH COMPUTERConsidering low-cost mobile phones for your workers? Step up to the business-class durable TC21/TC26 Touch Computers — without stepping up in price. Choose the connectivity your workers need – the WiFi-only TC21 or the WiFi/cellular TC26. Then choose the features that will allow your workers to improve task accuracy and on-the-job efficiency. And you can protect it all with the affordable optional Zebra OneCare™ SV support plan, which covers normal wear and tear and much more.A NEW LEVEL OF FEATURES FOR A VALUE-PRICED DEVICEYou get consumer cell phone pricing but big business features, including a durable design, Android 10 — loaded with new powerful business features, wireless connections and a large 5-inch HD display, plus superior voice quality over cellular (TC26 only) and WiFi networks, all in a lightweight right-sized device designed for one-handed operation.THE MOST OPTIONS TO CUSTOMIZE YOUR DEVICES FOR THE JOBFor scan intensive tasks, choose from two dedicated scan engines. Get up to 14 hours of power for a double shift with the extended battery. Support technicians in the field with a 5 MP front camera for video calling. A wearable wrist mount provides comfortable hands-free operation — and Zebra’s RS5100 Bluetooth ring scanner adds hands-free scanning.MOBILITY DNA: AN EXTRAORDINARY TOOLSET FOR UNMATCHED VALUEEvery device comes standard with Mobility DNA Professional, a suite of powerful tools that put the TC21/TC26 in a class of its own. Tools are pre-loaded and ready to use. And you can unlock powerful advanced tools that take workforce productivity and device management simplicity to a new level with the optional Mobility DNA Enterprise License.

Zebra BTRY-EC5X-ST1-01 handheld mobile computer accessory Battery Accessories