Zebra ZQ520 Soft Case

L-FPR2K-ASASC-5= Accessories

Cisco L-FPR1010-SEC-PL= software license/upgrade 1 license(s) Accessories

NC55P-ADVL3-100T Accessories

Digitus Network cabinet Dynamic Basic series - 600x600 mm (WxD) Accessories

The DIGITUS® Dynamic Basic series has been manufactured, designed and developed for the high demands of IT infrastructure- Roof is prepared to accommodate a fan element (punched-out mounts)- Lockable swivel lever handle on the front door- Base with punched cable inlet, covered with screwed plateThe Dynamic series network cabinets have been developed for simple and particularly cost-optimized network expansion. Sophisticated positioning of the cable inlets ensures effortless installation depending on the application. In the floor chassis, this is located centrally at the rear, protected by a screw-fastened cover plate. Enclosures from 800 mm width are additionally extended by cable inlets with plastic covers on the left and right. These are also integrated in the roof (1 x for 600 mm enclosure width, 3 x for 800 mm enclosure width). The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side and rear panels as well as the lockable and removable front door improve accessibility. The door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Motorola Belt for Holster Accessories

This belt can be worn with the MC90XX and MC30XX Gun Holsters as well as the WT4000 Hip Mount and Freezer Pouch.

Motorola KT-BKL-RS507-10R printer kit Accessories

A set of 10 replacement strap buckles for the RS507 Scanner. Compatible with trigger and trigger-less configurations.

Motorola 25-124387-02R audio cable 2.5mm Black Accessories

Connects RCH50/RCH51 headset to devices with standard 3-pole 2.5mm barrel jack connector.Updated cable minimizes cross talk and intermittency issues.

Motorola CBL-TC55-CHG1-01 mobile device charger Smartphone Black USB Indoor, Outdoor Accessories

Rugged charging cable for TC55; requires PWRS-124306-01R, sold separately.

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x450 mm (WxD) Accessories

- 450 mm depth provides a space saving installation- Optimized air ventilation and exhaustion- Lockable safety-glass door with steel frameThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Zebra 11-134228-04 barcode reader accessory Mounting kit Accessories