Zebra SG-TC2L-BOOT-01 barcode reader accessory Case

CODEC PLUS WITH QUAD CAM AND ROOM NAVIGATOR FOR NON-CRYPTO Accessories

CODEC PLUS WITH QUAD CAM AND ROOM NAVIGATOR FOR NON-CRYPTO

Cisco SM-X-16FXS/2FXO= network equipment spare part Voice network module Accessories

The FXO port is used to connect to PBX or key systems, or to provide off-premises connections to the PSTN. It supports battery reversal detection and caller ID. The FXO port is also used to connect to analog Centralized Automatic Message Accounting (CAMA) trunks to provide dedicated E-911 service (in North America only).The FXS port is used to connect analog phones, modems, fax machines, and speaker phones to an enterprise IP voice system, so you can use them as extensions to your Cisco or third-party IP call-control system. Having these devices tightly integrated with the IP-based phone system is advantageous for increased manageability, scalability, and cost-effectiveness. The Direct Inward Dialing (DID) port is used to provide off-premises DID connection from the central office. It serves only incoming calls from the PSTN. Caller ID is not supported in DID mode.

HDST-35MM-PTT1-02 Accessories

Cisco SM-X-16G4M2X network switch module Gigabit Ethernet Accessories

The Cisco SM-X Layer2 EtherSwitch Service Module is crafted to reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) ports within the Cisco ISR4000 Series routers. Extending the power of intent-based networking, this integration allows network administrators to configure a single box for all LAN and WAN needs lowering network complexity and maintenance.The Cisco SM-X EtherSwitch Modules provides for an enterprise class line of features on the Cisco ISR 4000 series routers, greatly expanding the capabilities of the router by integrating industry-leading Layer 2 switching with feature sets that are built on the lines of those found in the Cisco Catalyst 9200 Series switches.The Cisco SM-X Layer2 EtherSwitch Service Module takes advantage of the increased capabilities on the Cisco UADP module to provide scale, security and ease of operation. Because the Cisco SM-X Layer2 EtherSwitch Service Modules support the same UADP 1.0 ASIC as the Catalyst 9200 it allows the module to provide a ubiquitous configuration at headquarters and at the branch office to create a consistent experience throughout your network.Supported models and configurationsTable 1 gives specifications of the Cisco SM-X EtherSwitch Service Modules. All Gigabit Ethernet ports support auto-negotiating 10/100/1000 Mbps. Based on the model up to 8-ports of 2.5G mGig support helps provide uplink connectivity to Access Points and Uplink Expansions, external Advanced 4G LTE and (future) 5G connections. Up to two 10G SFP+ based fiber ports provide for Server connectivity or for high speed aggregated connection to high-speed switches.

CISCO ROOM NAVIGATOR - TABLE STAND VERSION Accessories

CISCO ROOM NAVIGATOR - TABLE STAND VERSION

Cisco NIM-2MFT-T1/E1= network equipment spare part Voice network module Accessories

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco NIM-4FXSP= network equipment spare part Voice network module Accessories

The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.

Zebra TC26 handheld mobile computer 12.7 cm (5") 1280 x 720 pixels Touchscreen Black Accessories

CISCO UCS B200 M6 BLADE W/O CPU MEM HDD MEZZ UPG Accessories

CISCO UCS B200 M6 BLADE W/O CPU MEM HDD MEZZ UPG