Zebra SG-TC2Y-ARMNT-01 barcode reader accessory Mounting kit

Digitus Base for network cabinets from the Unique & Dynamic Basic series - 600x800 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS Professional. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Roof Cooling Unit for Unique Server Cabinets Accessories

The DIGITUS 483 mm (19") equipment is made for high demand IT-infrastructure solutions, produced on German standards.- For installation into top-floor moduleThe Roof Ventilation Units are suitable for all server cabinet of the Unique series. The installation in the roof module of the cabinet can be done quick and easy. A switch as well as an adjustable thermostat provide best options for customizations. The model is available in standard color grey (RAL 7035) and black (RAL 9005), equipped with either four or six fans.

Digitus Server Rack Unique Series - 600x1000 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Special roof construction for fan unit, incl. perforated cover- Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)- Sliding cable entry with rubber sealing on the top and baseThe server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

StarTech.com Rack Unit Labels - Up to 52U - 2-Pack Accessories

Ensure perfect rail-to-rail alignment, when mounting equipment in your server rack with these rack unit labeling stripsThese labels help you install equipment in your server rack more easily. You can add up to 49 unit markings on either side of any rack. This is perfect for adding unit measurements to server racks that don't have unit markings, or to older racks that have had their markings worn off over time.This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Avoid hassle when installing rackmount equipmentWhen rack unit measurements are not visible, it can make installing large equipment a hassle. You typically have to align the equipment by eye, which can lead to installing the device in different unit holes on each side of your rack, but that could cause the annoying and time-consuming task of repositioning the device after it's been installed. Using these rack labels is an inexpensive solution that ensures proper alignment and hassle-free installation.Fast and simple application on any rack, up to 49U in sizeThe label strips are self-adhesive, easily attaching to the side of your rack for a simple installation. Each label in the kit contains markings for up to 49 units. This ensures that you can easily cut the label down to a smaller size and fit any rack, up to 49U in size.The labels included in the RKUNITAPE are backed by a 2-year StarTech.com warranty and free lifetime technical support.The StarTech.com Advantage

Zebra MNT-TC8X-FMKT8-01 barcode reader accessory Accessories

Un-powered Forklift Mount. Allows installing the TC8000 on a roll bar or square surface of a forklift and allows to use the device on landscape or portrait mode.Includes: Forklift Holder (MNT-TC8X-FLCH-01), Clamp Mount (3PTY-PCLIP-215677) and 8” Pedestal Arm with 90°Offset (3PTY-PCLIP-215886).

UCS 2204XP I/O MODULE (4 EXTERNAL, 16 INTERNAL 10GB PORTS) Accessories

UCS 2204XP I/O MODULE (4 EXTERNAL, 16 INTERNAL 10GB PORTS)

Zebra SG-STYLUS-TCX-MTL-03 stylus pen Black, Silver Accessories

Stainless steel and brass, no plastic parts, works in rain and snow. Real pen feeling with a smooth glide!

StarTech.com USB 3.0 to VGA Adapter, USB to VGA Monitor Converter for Windows, Slim (no support for macOS/ChromeOS/Linux) - TAA Accessories

USB 3.0 External Video & Graphics Card | Multi-Monitor | USB-Powered | Supports Windows®The USB32VGAES Slim USB 3.0 to VGA Adapter turns a USB 3.0 port into a VGA output port with 1920x1200/1080p video support. The adapter minimizes clutter with a slim design that seamlessly blends with your video cable - an ideal space-saving solution for multi-monitor applications on Ultrabook™; laptop, or desktop computers.Functioning as an external graphics card, this USB to VGA adapter provides a convenient way to add multi-monitor capability to a USB 3.0-enabled desktop or laptop computer (optimal performance from USB 3.0, backward compatible with USB 2.0).To save space while travelling, this ultra-portable USB to VGA adapter features a lightweight, small footprint design that fits easily in a laptop carrying bag.Leveraging the high-bandwidth (5 Gbps) SuperSpeed USB 3.0 interface, the adapter delivers smooth, high-definition content to your VGA display/projector. The adapter can be used to mirror your primary desktop, showing the same image on each display, or to extend your desktop to double your workspace and increase your productivity.The USB32VGAES is backed by a StarTech.com 3-year warranty and free lifetime technical support.Recommended System Requirements:CPU: Quad Core 2.4GHz or Higher (i5 recommended)RAM: 4GB or higherUSB 3.0 port (Backwards compatible with USB 2.0)The StarTech.com Advantage

Cisco CS-KIT-MINI-FMK= mounting kit Black Accessories

LTE-ANTM-SMA-D Accessories