Peplink ACW-601-EU power adapter/inverter Indoor Black

FPR2K-NM-8X1G Accessories

Digitus Base for IP55 wall-mounted enclosure - 600x600 mm (WxD) Accessories

- Extends the height and storage space for excess cable lengths- Enables installation on a solid floor foundationThe base for 483 mm (19") IP55 wall-mounted enclosures extends the height by 100 mm and provides space for structured cabling. Installation is carried out in simple steps with the enclosed screws. The base is also equipped with a seal to maintain the IP55 degree of protection. Enables installation on a solid floor foundation.

BTRY-NGTC5TC7-44MABL Accessories

Digitus Lockable castors for open racks & IP55 free standing cabinets Accessories

- Set = 4 pcs.- 2x lockable- RotatingThe DIGITUS® Lockable castors are delivered in a set of 4 pieces inclusive mounting material and are therefore quick and easy to install and to use. With a loading capacity of 250 kg per unit they provide a high stability for your 19" cabinets.

FPR1140-BUN Accessories

Peplink ACW-724 network antenna accessory Antenna mount Accessories

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x450 mm (WxD) Accessories

- 450 mm depth provides a space saving installation- Optimized air ventilation and exhaustion- Lockable safety-glass door with steel frameThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Cisco FPR2K-SSD100= SSD Accessories

Cisco FPR1K-CBL-MGMT= mounting kit Grey Accessories