CS-CODEC-PLUS-K9

Tripp Lite SRW21U SmartRack 21U Low-Profile Switch-Depth Wall-Mount Half-Height Rack Enclosure Accessories

The SRW21U SmartRack® 21U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.The SRW21U comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

SGRWISK9-15002SE= Accessories

Cisco GRWIC-4G-LTE-EA modem Accessories

The Cisco Connected Grid 2G/3G/4G Multimode LTE GRWIC modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). These GRWICs provide second-generation (2G), third-generation (3G), and fourth-generation (4G) cellular technologies and are backwards-compatible with older technology. Suitable as both primary and secondary WAN connections, these GRWICs support the latest 4G standards (3GPP Release 8 LTE) as well as 3GPP and 3GPP2-based 3G and 2G access technologies, and transparent handoff from 2G/3G to 4G LTE.These GRWICs support the 3GPP2 technologies of Code Division Multiple Access (CDMA) such as CDMA 1xRTT, Evolution-Data Optimized, or EVDO Rev 0 and Rev A. They also support the 3GPP technologies of the Global System for Mobile Communications (GSM) and Universal Mobile Telecommunications Systems (UMTS) such as GSM, EDGE, or Enhanced Data Rates for Global Evolution; General Packet Radio Service (GPRS); and High-Speed Packet Access (HSPA), which included High-Speed Uplink Packet Access (HSUPA) and High-Speed Downlink Packet Access (HSDPA). In addition, the new LTE 4G technology is supported.

Digitus Shelf for Fixed Installation in 483 mm (19") Cabinets Accessories

- Perfect for storage of components which are not 483 mm (19”) suitable- Slim design which takes space of 1 height unit- Easy and quick to mount or dismountThe shelves for fixed mounting can be installed easy on the two front 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to their stable, perforated steel sheet with a high load capacity, they are the optimal surface for components which are not 483 mm (19”) suitable.

Cisco GRWIC-D-ES-6S= network switch module Fast Ethernet Accessories

The Cisco Ethernet Switch Module (CGR 2010 ESM) greatly expands the Cisco 2010 Connected Grid Router’s capabilities by integrating industry-leading Layer 2 and Layer 3 (optional) switching with feature sets comparable to those found in the Cisco 2520 Connected Grid Switches. The new Cisco Ethernet Switch Module along with the Cisco 2010 Connected Grid Router (CGR 2010) are designed specifically for use in connected energy applications such as grid automation, distributed generation, integrated renewable energy, trackside substations, and water, oil, and gas applications. The CGR 2010 ESM uses Cisco IOS® Software, which is the operating system powering millions of Cisco switches worldwide, and provides the benefits of improved security, network resiliency and reliability, and scalability.Primary CGR 2010 ESM features:- Rugged industrial design and substation compliance: IEC-61850-3 and IEEE 1613 for utility substation environments- Tools for easy deployment, management, and replacement- Extensive instrumentation and remote diagnostic capability- Advanced quality of service (QoS) capabilities to support mission-critical substation applications such as Supervisory Control and Data Acquisition (SCADA) and IEC 61850 Generic Object Oriented Substation Events (GOOSE) messaging- Comprehensive network security features based on open standardsRugged Ethernet switch with 4 Fast Ethernet (FE) SFP ports, one dual-purpose Gigabit Ethernet uplink, and one Gigabit Ethernet fiber SFP port. The Layer 2 LAN Base image is included.

Digitus Ventilation Unit for variable 483 mm (19") installation Accessories

- For installation into 483 mm (19") unitThe Roof Ventilation Units are variable mountable into 483 mm (19") cabinets. Each fan unit comes with two sets of mounting brackets. With the standard set you can install your fan unit into any height unit space of your network- or server cabinet. The second bracket set makes the fan unit possible to be mounted into the roof of 483 mm (19") network- or server cabinets of the varioFLEX series. A switch as well as an adjustable thermostat provides best options for customizations. The model is available in standard color grey (RAL 7035) and black (RAL 9005), equipped with either two or four fans.

Cisco GRWIC-2CE1T1-PRI network switch module Accessories

The Cisco® Connected Grid portfolio of solutions is designed specifically for the harsh, rugged environments often found in the energy and utility industries. These solutions include the Cisco 2010 Connected Grid Router (CGR 2010) and the Cisco 2520 Connected Grid Switch (CGS 2520), which have been designed to support the communications infrastructure needs of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This infrastructure includes the utility- and customer-owned energy infrastructure, such as substation applications supporting electrical transmission and distribution, renewable generation, oil and gas, water, distributed generation, co-generation, and trackside operations. The infrastructure also includes the communications infrastructure for delivery applications such as transmission pipelines, distribution mains, and service lines for oil and gas and water. Designed for highly secure, reliable, and scalable infrastructure, the CGR 2010 and CGS 2520 are an ideal platform to support Smart Grid and other energy delivery infrastructure needs of customers. These ruggedized products have been extensively tested and are KEMA certified to meet the challenging substation compliance standards including IEEE 1613 and IEC 61850-3.The Cisco Channelized T1/E1 and ISDN PRI Rugged WAN interface card (GRWIC) modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). This rugged router platform is optimized for the harsh conditions common in connected energy applications worldwide. The Cisco Channelized T1/E1 and ISDN PRI Grid Router WAN Interface Cards (GRWICs) combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI) in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. The Cisco CGR 2010 supports a one- and a two-port version of the T1/E1 module (Figure 1) in a single-wide GRWIC. The different versions help enable customers to deploy different port densities, depending on wide area network needs in connected energy network locations.The modules can be used in T1 or E1 networks and are selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premise equipment (CPE). The modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes.

Cisco GRWIC-1CE1T1-PRI= network switch module Accessories

The Cisco® Connected Grid portfolio of solutions is designed specifically for the harsh, rugged environments often found in the energy and utility industries. These solutions include the Cisco 2010 Connected Grid Router (CGR 2010) and the Cisco 2520 Connected Grid Switch (CGS 2520), which have been designed to support the communications infrastructure needs of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This infrastructure includes the utility- and customer-owned energy infrastructure, such as substation applications supporting electrical transmission and distribution, renewable generation, oil and gas, water, distributed generation, co-generation, and trackside operations. The infrastructure also includes the communications infrastructure for delivery applications such as transmission pipelines, distribution mains, and service lines for oil and gas and water. Designed for highly secure, reliable, and scalable infrastructure, the CGR 2010 and CGS 2520 are an ideal platform to support Smart Grid and other energy delivery infrastructure needs of customers. These ruggedized products have been extensively tested and are KEMA certified to meet the challenging substation compliance standards including IEEE 1613 and IEC 61850-3.The Cisco Channelized T1/E1 and ISDN PRI Rugged WAN interface card (GRWIC) modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). This rugged router platform is optimized for the harsh conditions common in connected energy applications worldwide. The Cisco Channelized T1/E1 and ISDN PRI Grid Router WAN Interface Cards (GRWICs) combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI) in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. The Cisco CGR 2010 supports a one- and a two-port version of the T1/E1 module (Figure 1) in a single-wide GRWIC. The different versions help enable customers to deploy different port densities, depending on wide area network needs in connected energy network locations.The modules can be used in T1 or E1 networks and are selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premise equipment (CPE). The modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes.

Cisco CAB-ACE-RA= power cable Black 2.5 m CEE7/7 C13 coupler Accessories

You provide power to a switch by using the AC internal power supply. The internal AC power supply is an autoranging unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

Cisco MEM-CF-256U4GB network equipment spare part Memory Accessories

100% Compatible – Built with only top grade components – Each Axiom Flash Card is manufactured to meet or exceed OEM specifications.