MA-MNT-ANT-6

Digitus Network cabinet Unique series - 600x600 mm (WxD) Accessories

The DIGITUS® network cabinets of the Unique series combine maximum stability with optimum flexibility in cable management, for the high demands of modern IT infrastructure with a wide variety of application scenarios.- High load capacity of the 483 mm (19") profile rails of up to 1200 kg- Swivel handle with profile half-cylinder lock incl. type 333 key on the front door- Modular, openable base chassis with removable 19" blind panels- Flexible cable routing options thanks to generous cable inlets with brushes in the base and rear- Roof is prepared to accommodate a fan unit and an attached, removable cover- Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)The network cabinets in the Unique series have been designed and produced for particularly convenient and flexible network cabling. Sophisticated optimizations offer market-compliant stability with maximum flexibility. A modular base chassis, which can be opened using screwed 483 mm (19") blind panels, offers sufficient space for cables of all kinds. In addition, there are cable inlets with brushes in the rear area of the base chassis. Rear brush strips above and below the rear door (from 26U) enable use in a wide range of application scenarios. Generous vertical cable ducts with cable routing aids and cover, installed in the front (from 800 mm enclosure width), perfectly round off the versatile features of the network enclosure. Two pairs of cranked and galvanized 483 mm (19") profile rails, labelled with height units that can be read in opposite directions, are installed inside. They are infinitely adjustable and are connected to additional depth struts in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

COVER AND SOLAR SHIELD FOR AP1530 SERIES Accessories

COVER AND SOLAR SHIELD FOR AP1530 SERIES

Cisco Aironet Original Mounting Bracket for Wireless Access Point , Low Profile Accessories

The AIR-AP-BRACKET-1 low profile wall/ceiling mount is used to mount a Cisco Aironet 1040, 1140, 1260, 3500 or 3600 series access points. Note: This is a low profile option. The wall/ceiling base is included with the necessary screws for installation. We proudly offer a compatibility guarantee and lifetime warranty for risk free purchasing.

Digitus Shelve for Network and Server cabinets Accessories

- Four fixing points fit at the sites of the rear and front mounting angles- Fixed installation1U fixed shelf for racks from 1000 mm depth,44x486x770 mm, up to 50 kg, black (RAL 9005)

C6807-XL-FAN= Accessories

STK-RPS-1005CH3 Accessories

StarTech.com 14U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19" Patch Panel Bracket for Shallow Server, IT Equipment, Network Switches - 77lbs/35kg Weight Cap., Black Accessories

Mount your network equipment such as patch panels or switches to the wallThe 14U 14in (35.5cm) deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space.Sturdy Construction & Easy InstallationThe mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework.Includes HardwareM6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware.The StarTech.com Advantage

Digitus Wall-mounted enclosure SOHO Pro - 483 mm (19") - 540x400 mm (WxD) Accessories

The DIGITUS® wall-mounted enclosure SOHO Pro series is characterized by efficient delivery in an optimized flat pack and particularly user-friendly installation.- Compact housing for 483 mm (19") installations- Simplified logistics: delivered unassembled in an optimized flat pack- Quickly ready for use: Particularly user-friendly, quick installation with just a few screws- Flexible cable routing options thanks to protected openings in the roof and floor- Lockable steel front door with perforation, 200° door opening angle- Depth-adjustable 483 mm (19") profile rails- Load capacity for the installation of components: 60 kgWhether in the home, office or for sub-distribution boards with limited space: With the compact 483 mm (19") solutions from the SOHO Pro series, you can install your network wherever you want. The variant with a front door made of perforated sheet steel is available in three height units (7U, 9U, 12U). All cabinets are equipped with a cable entry in the top and bottom. Two pairs of galvanized 483 mm (19") profile rails labelled with legible height units are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). The door hinges can be changed. The network enclosures are supplied unassembled in an optimized flat pack. Assembly takes place in just a few steps and is child's play thanks to the enclosed step-by-step instructions.