Poynting A-OMNI-0214-V1-01 network antenna Omni-directional antenna SMA 3.5 dBi

2.4GHZ OUTDOOR WI-FI ANTENNA KIT Antennas

2.4GHZ OUTDOOR WI-FI ANTENNA KIT

DUAL BAND DUAL-POLARIZED DIRECTIONAL ANTENNA Antennas

DUAL BAND DUAL-POLARIZED DIRECTIONAL ANTENNA

ANT-MP2-I-O-SS-M Antennas

Poynting MIMO-3-17 network antenna Omni-directional antenna SMA 21 dBi Antennas

The MIMO-3-17 is a 7-in-1 high performance multi frequency antenna within a single housing, providing four cellular, two Wi-Fi and a GPS/GLONASS antenna. The four cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies up to 3.8 GHz for 5G applications. The antenna also provides two separate dual-band Wi-Fi antennas, providing concurrent 2.4 GHz and 5 GHz on each antenna with 2×2 MIMO capability. The seventh antenna is a high-performance active GPS/GLONASS system operating down to -40°C. The MIMO-3-17 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over the wide frequency band.

Ubiquiti UISP Horn network antenna Horn antenna 19.5 dBi Antennas

The UISP® Horn is an efficient PtMP antenna that provides high isolation within congested environments by utilizing its wide operating frequency range. With the included WaveGuide adapter, this antenna can be easily attached to an airFiber 5XHD Radio (AF 5XHD), LTU Rocket , or airMAX Rocket Prism AC 5 GHz Radio (RP 5AC) to amplify their signal. The UISP Horn also has a latch on each side for secure, snap-in radio connection. Operation frequency may vary based on regional radio frequencies and regulations.

TELTONIKA-058R-00114-BIS-FM1000 OBD EXTENSION CABLE - PROMO FINO AD ESAURIMENTO SCORTE Antennas

TELTONIKA-058R-00114-BIS-FM1000 OBD EXTENSION CABLE - PROMO FINO AD ESAURIMENTO SCORTE

BRKT-39 - HEAVY DUTY RATCHET MARINE BRACKET Antennas

BRKT-39 - HEAVY DUTY RATCHET MARINE BRACKET

UBIQUITI-RD-5G31-AC-ROCKETDISH 31DBI, 5GHZ AC, ROCKET KIT Antennas

UBIQUITI-RD-5G31-AC-ROCKETDISH 31DBI, 5GHZ AC, ROCKET KIT

Ubiquiti NSM2 wireless access point 150 Mbit/s White Power over Ethernet (PoE) Antennas

Indoor/Outdoor airMAX CPEUbiquiti Nanostation M2, 150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors.Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. In addition, any NanoStation can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter.Remote reset is an additional option. Nanostation M comes standard as 24V without remote reset.Featuring a panel antenna and dual-polarity performance, the NanoStation M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor.Compact CPE DesignThe NanoStation M features the CPE design that expanded the global Wireless ISP industry.Plug and Play InstallationThe NanoStationM requires no tools for assembly; only a single wrench is required for pole-mounting.Versatile Application UseThe NanoStation M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE.Dual Ethernet ConnectivityWith software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.Powerful airOS FeaturesUbiquiti’s versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.Advanced Software TechnologyUbiquiti’s airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.Window/Wall Mounting KitUse the NanoStation Mount to quickly mount the NanoStation M on a window or wall. 180° vertical or horizontal adjustment allows for custom positioning.Wall/Pole Mounting KitThe Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation M. 90° tilt adjustment allows for easy positioning.

ANT-MP2-I-O-SS-M= Antennas